Installing the Furrion LED Marker Light RV Side Cameras

Published 04/12/2022

Products Featured in This Question

LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2

(69)

$365.15

Digital Multimeter with 42" Long Test Leads - LED Display

(3)

$21.87

Question:

Hello, I have a 2020 Sportsman Classic and Im looking to hook up the Furrion Vision 5 Corner Cameras FCE48TASH. When I take my current side markers off Im presented with two wires. a White and a Green/White see attached photo. Which wires on the Furrion do I hook up to which wires on the sportsman? Any Help would be greatly appreciated.

asked by: Scott W

Expert Reply:

I would be happy to help you. The wires coming off of your trailer that are pigtailed into the wire cap are your power and ground wire. The white wire with the green stripe is most likely your power wire. You can confirm it with a Digital Multimeter like item # PT89ZR. The plain white wire will be your ground. You will want to connect these to the corresponding labeled wires on the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems item # FCE48TASL.You will want to keep those pigtailed wires together and insert your camera's wiring where you removed the side markers. The other wires will connect to your Furrion Camera and Monitor. You will only connect the ground and power wire from your camera to those two wires.

expert reply by: Jerred H