Bracket Size Used With Fastway E2 Hitch and Compatibility With Propane Tank Pan

Published 04/12/2022

Products Featured in This Question

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW

(169)

$565.23

Standard RV LP Gas Tank Pan - Black

(6)

$44.93

Replacement Inner Link Plate for Fastway e2 Sway-Control Bracket

(38)

$31.15

Replacement Outer Link Plate for Fastway e2 Sway-Control Bracket

(137)

$40.58

Question:

what would be the brackets size that will mount on the frame. Looking for clearance from the trailer mounter twin propane tank carrier

asked by: Duane H

Expert Reply:

The Link Plates # FA93-02-5350 & # FA93-02-5200 for the Fastway e2 Weight Distribution # FA92-00-0800 are 1-1/2" wide. The center of these plates should be mounted at 30" from the center of the hitch ball coupler. They are able to be moved up to 27" if your propane tank carrier will interfere with the brackets.

You can also move the Propane Tank Pan # 37207-31535 forwards or back on your trailer to allow the brackets to sit where you need on the trailer. You will just have to remove your tanks to remove the self tapping fasteners used to hold the pan in position. Then you will be able to refasten the pan where it will not interfere with your weight distribution hitch brackets.

expert reply by: Bud M