Replacement Brake Mounting Flange for 3 Inch Diameter Mobile Home Axle Used on Trailer
Updated 03/23/2022 | Published 03/22/2022
Products Featured in This Question
Question:
I am trying to put electric brakes on mobil home axle. The axle is 3. The drum is 12inch x 2 I had to cut off old brake mountding flange and need 3inch flange to go on axle. If you will give me the part nubmers I will order from you today. Thank you
asked by: Lee S
Expert Reply:
Mobile home axles are meant for a one-time use, so getting replacement parts for them is typically difficult to impossible, but assuming you already have hubs compatible with the existing spindles, we have the parts you'll need.
A three inch axle would typically have a 6-7K capacity and use a # 4-44-1 brake mounting flange. The compatible brake assemblies would be part # 23-105-106 which are compatible with a 12 x 2 brake hub/drum.
It's recommended that you use a welder who has experience with trailer axle fabrication to install the brake mounting flange, as the placement needs to be absolutely perfect.
Product Page this Question was Asked From
Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 2-3/4" Pilot Hole
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 2-3/8 Inch Diameter Axle
- Demco
more information >
Continue Researching
- Q&A: Replacing Wiring on Old Livestock Trailer with Electric Brakes
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Lighting Requirements
- Q&A: Can a Hayes 10 x 1 5/8" Braking Assembly W/ No Mounting Flange Be Converted to a Standard Flange
- Q&A: Can Brakes be Installed on Only One of the Axles of a Tandem Axle Trailer
- Q&A: Recommended Brake Assembly 12x2 with 4 Bolt Mounting Pattern
- Q&A: Correct Replacement Braking Assemblies for an Older Hayes AL-KO 12K Axle
- Q&A: Available 12 x 2-Inch 6K-Rated Electric Trailer Brakes with 4-Bolt Mounting Pattern
- Q&A: Looking For Brakes For Kelsey Hayes/AL-KO 12"x2" Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams