Can You Use Mito Corporation Cameras with the Rear View Safety 9" Color Monitor

Question

Question:

I need to know if your Rear View Safety Color Monitor - 9inch LCD Digital Screen - Quad View Item # RVS-6139Q is compatible with Mito Corporation Backup and side view cameras. These cameras have six pin male connectors at my monitor.

asked by: Doug W

0

Expert Reply:

I contacted the manufacturer in regards to your question, they informed me that the Rear View Safety Color Monitor # RVS-6139Q uses cameras with 5 pin connectors, so your Mito cameras with 6-pins would not work unless you wanted to use the Rear View Safety Splice Kit # RVS-SPK01 to splice your cameras in.

They did strongly recommend that their cameras, like the Rear View Safety Backup Camera # RVS-771, Rear View Safety Side Camera - Driver's Side # RVS-775L and Rear View Safety Side Camera - Passenger's Side # RVS-775R be used.

expert reply by: Scott S

0

Answer 1

The easiest way to tell if you need to upgrade your wiring is to disconnect your monitor and camera to check the connection points. You may be able to use your current wiring if you use an adapter like the Rear View Safety Splice Kit #RVS-SPK01. It…

view full answer...

Answer 2

There may be a way to get the Rear View Safety Backup Camera System #RVS-062710 to work if you have enough wire. To wire these cameras properly you're going to need to connect the red to power, the yellow to the left turn signal, the brown to the…

view full answer...

Answer 3

I reviewed Winnebago documentation for 2004 model year motorhomes and some came with the option of a Jensen in-dash radio/rearview monitor system while others did have a Sony option. The best way to know what was installed on your specific RV is to…

view full answer...

Answer 4

The Rear View Safety Color Monitor - 9" LCD Digital Screen #RVS-6139N is not directly compatible with the Velvac mirror cameras. However, when you use the Rear View Safety Splice Kit #RVS-SPK01 they can be compatible according to my tech contact…

view full answer...

Answer 5

I confirmed with the vendor that the Rear View Safety Backup Camera #RVS-Tundra works with any of their Rear View Safety monitors, being that it is the common 5 pin. You could use Rear View Safety Color Monitor - 9" LCD Digital Screen #RVS-6139N…

view full answer...

Answer 6

For the Rear View Safety Splice Kit #RVS-SPK01 I think that is a great idea, soldering them together and protecting them with heat shrink will guarantee they are connected properly while protecting the connection from damage. To accomplish this, if…

view full answer...

Answer 7

To replace the female 5-pin connector for your RVS backup camera system we have the Rear View Safety Splice Kit #RVS-SPK01. This comes with 2 of the female connectors that have bare wires on the other end so you can cut off your current connector and…

view full answer...

Answer 8

If you are looking to replace the camera so that it works with your monitor #RVS-6139N that you referenced, it looks like your current camera resembles part #RVS-775R. Since you are having trouble getting a camera feed on your monitor and it looks…

view full answer...

Answer 9

The Rear View Safety Color Monitor - 9" LCD Digital Screen part #RVS-6139N uses a 5 pin connector. The monitor is designed for use with a Rearview Safety Camera. If you tell me what you are trying to use the Monitor for I can help you further.

view full answer...

Answer 10

Thanks for the pictures of your wiring. The Rear View Safety Color Monitor #RVS-6139N that you referenced uses the same connector style. So you would be able to hook up your current camera system to this monitor and it would work well.

view full answer...

Answer 11

I went ahead and contacted Voyager about this, and they told me that the Voyager RV Side Camera is only designed to work with Voyager monitors like the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR. This is because these…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Can You Use Mito Corporation Cameras with the Rear View Safety 9" Color Monitor

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching