Replacement 5-Pin Female for RVS Camera System

Question

Question:

Need to replace end of cable between trailer and vehicle. 5 pin Female for backup camera

asked by: Paul G

0

Expert Reply:

To replace the female 5-pin connector for your RVS backup camera system we have the Rear View Safety Splice Kit # RVS-SPK01. This comes with 2 of the female connectors that have bare wires on the other end so you can cut off your current connector and splice in the replacement.

expert reply by: Jon G

0

Answer 1

Hi Maxx, There is a similar option which you can use, and while you'd have to reconnect the wiring, the fit will be the same. For this you can use the Drive RV DVD Player - Single DIN - 180W - 12V #324-000032. This requires a 7-1/4" wide x…

view full answer...

Answer 2

If you've already tried resetting and cleaning the unit then you'll need to replace it. I recommend the Furrion RV Stereo - Single DIN - HDMI, AUX/USB, Bluetooth, NFC, App Control - 60W - 2 Zone - 12V Item #DV3300SBL to replace it. This…

view full answer...

Answer 3

The Rear View Safety Splice Kit #RVS-SPK01 contains 2 female connectors. If you are needing one male and one female connector I recommend using the Rear View Safety Camera Extension Cable #RVS-101N and cutting it so that you have one female and one…

view full answer...

Answer 4

Hello Richard, thanks for reaching out. Yes, the Replacement Plastic Check Valve for B&B Molders City Water Inlet #BM98GR will indeed work with the B&B Nautilus P4 RV Water Control Panel. The check valve works with all of the B&B panels,…

view full answer...

Answer 5

The Redarc In-Vehicle BCDC Battery Charger #331-BCDC1250D that you referenced would work great with all of the components you mentioned. The 270 amp alternator and the Magum Energy MS2812 Inverter.

view full answer...

Answer 6

The easiest way to tell if you need to upgrade your wiring is to disconnect your monitor and camera to check the connection points. You may be able to use your current wiring if you use an adapter like the Rear View Safety Splice Kit #RVS-SPK01. It…

view full answer...

Answer 7

The Rear View Safety Color Monitor - 9" LCD Digital Screen #RVS-6139N is not directly compatible with the Velvac mirror cameras. However, when you use the Rear View Safety Splice Kit #RVS-SPK01 they can be compatible according to my tech contact…

view full answer...

Answer 8

I confirmed with the vendor that the Rear View Safety Backup Camera #RVS-Tundra works with any of their Rear View Safety monitors, being that it is the common 5 pin. You could use Rear View Safety Color Monitor - 9" LCD Digital Screen #RVS-6139N…

view full answer...

Answer 9

I went ahead and contacted Voyager about this, and they told me that the Voyager RV Side Camera is only designed to work with Voyager monitors like the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR. This is because these…

view full answer...

Answer 10

If you are looking to replace the camera so that it works with your monitor #RVS-6139N that you referenced, it looks like your current camera resembles part #RVS-775R. Since you are having trouble getting a camera feed on your monitor and it looks…

view full answer...

Answer 11

Thanks for the pictures of your wiring. The Rear View Safety Color Monitor #RVS-6139N that you referenced uses the same connector style. So you would be able to hook up your current camera system to this monitor and it would work well.

view full answer...

Answer 12

The Rear View Safety Color Monitor - 9" LCD Digital Screen part #RVS-6139N uses a 5 pin connector. The monitor is designed for use with a Rearview Safety Camera. If you tell me what you are trying to use the Monitor for I can help you further.

view full answer...

Replacement 5-Pin Female for RVS Camera System

Product Page this Question was Asked From

Continue Researching