Fit of Extang EX1104 Replacement Clamps for eMAX Tonneau Cover with 2018 Chevy Silverado 1500

Question

Question:

Will these fit my 2018 chevy silverado 1500?

asked by: Scott S

1

Helpful Expert Reply:

The Extang # EX1104 clamps aren't a vehicle specific item. They're meant to replace the sliding clamp assembly on an Extang eMAX soft tonneau cover, so if that's the cover you have, they'll work for you.

If you're unsure of which Extang tonneau cover you have, look for the serial number printed on the underside of the tarp, usually up at the front of the bed. If you can provide that number I can confirm which cover you have.

expert reply by: Mike L

1

Answer 1

Yes, we sell both of the parts you are looking for in the attached photo. These two parts are the Replacement Clamps for Extang Trifecta Soft Tonneau Covers part #EX2244-0204 and the Replacement Tail Clamp Assembly for Extang Trifecta 2.0 Tonneau…

view full answer...

Answer 2

IF you're finding that the clamps #EX2244-0204 are too small and don't fit the bed rails on your vehicle, you can trim the plastic to get the clamp to fit. I've attached a snippet from the installation instructions showing Extang giving…

view full answer...

Answer 3

The Replacement Clamps for Extang Trifecta Soft Tonneau Covers #EX2244-0204 will indeed fit the factory track system on a 2021 Nissan Frontier. While this may work, it is not technically designed for your Tonno Pro hard fold #TPHF-452. We do not…

view full answer...

Answer 4

Yes, the Trifecta ALX Soft Tonneau Bed Cover item #EX93CV is a way better cover in my opinion. You can secure it when you lock your Frontier's tailgate. The Extang Trifecta 2.0 item #EX89CV does not include the auto-latching system. It just…

view full answer...

Answer 5

For your Extang Solid Fold 2.0 Hard Tonneau Cover 83835, on your 2022 Toyota Tacoma with a 6' bed, we have the: -Replacement Tail Clamp Assembly for Extang Solid Fold 2.0 and Trifecta Tonneau Covers #EX31003005, & -Replacement Jaw Grip Clamp…

view full answer...

Answer 6

Replacement Sliding Clamp Assembly for Extang eMAX Soft Tonneau Cover #EX1104 comes with both clamps, not just one. I attached a demonstration video which goes over this clamp and shows how two are included.

view full answer...

Answer 7

We have replacement clamps for the Tonno Pro tonneau covers with the part #TPLR-9005 but the part #EX2244-0204 would only be a fit for Extang tonneau covers.

view full answer...

Answer 8

I attached a picture that shows the parts included with an Extang Revolution and the only clamps that come with it are what comes in the #EX22540406 that you referenced. If you have different clamps you many have a different cover.

view full answer...

Answer 9

I was not able to find anything regarding that serial number, however I can say that #TX578101-REARHEADER will not work with your 2010 Toyota Tacoma short bed. However if you have the TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX555901, then you can…

view full answer...

Answer 10

If the clamp is the jaw style you'd want the part #EX42FJ or if it's a tail clamp the part you would need is the #EX31003005.

view full answer...

Answer 11

Yes, the adapter clamps that are used to secure the Extang Trifecta 2.0 Tonneau Cover #EX92985 to the Utili Track on your 2018 Nissan Frontier can be found with part #EX2244-0204. This includes all 4 clamps needed for installation. If you can tell me…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Fit of Extang EX1104 Replacement Clamps for eMAX Tonneau Cover with 2018 Chevy Silverado 1500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching