Will Road Armor Shock Absorbing Equalizer Kit Work with a 35" Axle Spread

Question

Question:

I am looking at the Road Armor Spring Equalizer item #LC696740 My 2014 Keystone Cougar 337FLS has a 35 wheelbase, these look far narrower than my MORryde CRE 3000 springs now. Is there a set for a 35 wheelbase instead of these that appear to be for a 33 wheelbase?

asked by: Mark

0

Expert Reply:

The Road Armor Shock Absorbing Equalizer Kit part # LC696740 is only for a 33" axle spread and there is not another set for 35" but as you mentioned we do have other like options for a 35" axle spread. The MORryde Shock Absorbing Suspension Equalizers part # MR27ZR are a great cushioned alternative that will preform very similarly and they are designed for a 35" axle spread.

expert reply by: Conner L

0

Answer 1

Furrion RV Soundbar #FSB24SA2C-BL has standard inputs, left and right channels, for regular speaker wire. The other end of the speaker wire would have to be connected to a stereo or device that accepts regular speaker wire.

view full answer...

Answer 2

Yep, you'll need to go with longer shackle straps for the taller Road Armor Shock Absorbing Equalizer Kit #LC696740. For 3-1/8" straps use the Lippert AP Kit - Tandem Axle Road Armor Wet Bolts and Shackles #LC52SV.

view full answer...

Answer 3

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 is designed for a 35" axle spread so it won't work well for you but we do have a set of cushioned equalizers that will, the Dexter E-Z Flex Suspension Kit - Double-Eye Springs part…

view full answer...

Answer 4

You could do that, but in order to get the height increase, you'll also need to go with taller front and rear spring hangers. For instance, if your current equalizers are 2 inches high, and you switch to the #TREQ310 equalizer which would add two…

view full answer...

Answer 5

Never Fail Bushings have been discontinued, though they should not be used with wet bolts like the Wet Equalizer Bolt #126B2 or #34007-187-00. The lubricant would actually cause the bushings to degrade so the better course of action would be to use…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Will Road Armor Shock Absorbing Equalizer Kit Work with a 35" Axle Spread

Products Featured in This Question

Continue Researching