How To Install the Hot-Line LED Trailer Light Bar

Updated 12/29/2021 | Published 12/28/2021

Products Featured in This Question

Hot-Line LED Trailer Light Bar - Stop, Turn, Tail - Submersible - Red Lens

(31)

$33.10

3rd Brake Light Logic Module

(182)

$20.93

Question:

There are the 3 wires. Can I connect the red brake light on both yellow and green turn/ brake light wires so both will work? Wont that cause both blinkers to back feed and blink or do I only connect to one and have only one blinker?

asked by: Clay L

Expert Reply:

The Hot-Line LED Trailer Light Bar part # 328-003-6017R is a tail light; the white wire is for ground, the black is for running, and the red wire is for stop/turn. If you were going to use this as a third brake light then you would need to separate out the turn signal circuit using a module like the 3rd Brake Light Logic Module part # PP20-702.

I don't recommend connecting both yellow and green wires to the light, you would need to do one or the other with the module in-between.

expert reply by: Conner L