Replacement Lens for Wesbar Trailer Tail Lights 403076 and 403026

Question

Question:

8 inch by 2 and seven eigths

asked by: Bruce

0

Expert Reply:

For a set of replacement lenses for the Wesbar lights associated with the replacement capsule 763560 that you have referenced you would need to use # 053522033360. This also includes the smaller side lenses. The larger lenses measure 8 inches by 2-7/8. For a single larger lens use # 102641.

expert reply by: Michael H

0

Answer 1

We do have a replacement lens available. The part is #745369. This lens is a replacement for the Wesbar #403335.

view full answer...

Answer 2

Hey Tom, we do have the replacement passenger side taillight you are looking for with the part #ST16RB. We also have just the lens too but like you said it doesn't look like that what you need but it's part #A16RB. Hows your drivers side…

view full answer...

Answer 3

The Replacement Red Lens for Wesbar Submersible Trailer Tail Lights #102641 that you referenced measures 8 inches wide by 2-13/16 inches tall. I attached a picture that shows it's dimensions as well.

view full answer...

Answer 4

Thanks for reaching out! You are correct that the SAE number isn't the part number for the trailer light. It stands for Society of Automotive Engineers and is just a way of showing that the light manufacturer completed the required testing for…

view full answer...

Answer 5

Yes, the Wesbar Replacement Lens Set, #053522033360, does contain the large lens, #102641. If you just needed the large lens, the you can purchase it individually, see attached product link.

view full answer...

Answer 6

The #102641 is only the larger lens. For the large lens and side lens you would need the Wesbar Replacement Lens Set #053522033360.

view full answer...

Answer 7

I pulled a Wesbar Replacement Lens Set #053522033360 and found that the outer dimensions are the same as your lenses. 8 inches by 2-7/8 inches. And even the long dimension of the bolt holes is the same at 7-1/4 inches, but the shorter distance is…

view full answer...

Answer 8

Hi Ray; the Wesbar lights you're referencing have been discontinued and the same is true for the replacement lens. For replacement lights with a similar style and dimensions we have the Aero Pro Combination Trailer Tail Light #ST37RB and #ST36RB.…

view full answer...

Answer 9

The SAE STIAP2 04 DOT number you provided is a DOT approval number, which states that the lens is compliant with DOT regulations. Because of that, that number isn't typically a good identifier for finding a replacement lens. However, in this…

view full answer...

Answer 10

The Wesbar light that the replacement lens #102641 you were looking at fits has been discontinued. The company that bought Wesbar has been getting rid of a lot of their lights so it is unlikely you will find it. However, the Optronics Combination…

view full answer...

Answer 11

If your tail lights look like #STL16RB or #STL17RB, then you can use the Replacement Tail Light Lens, #A16RB.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Lens for Wesbar Trailer Tail Lights 403076 and 403026

Continue Researching