Replacement Lens Options for the Wesbar Tail Light Lens # 102641

Question

Question:

Hi is your part 053522033360 same as wesbar # 102641 tail light lens

asked by: Loren

0

Expert Reply:

Yes, the Wesbar Replacement Lens Set, # 053522033360, does contain the large lens, # 102641. If you just needed the large lens, the you can purchase it individually, see attached product link.

expert reply by: John H

0

Answer 1

Thanks for reaching out! You are correct that the SAE number isn't the part number for the trailer light. It stands for Society of Automotive Engineers and is just a way of showing that the light manufacturer completed the required testing for…

view full answer...

Answer 2

The #102641 is only the larger lens. For the large lens and side lens you would need the Wesbar Replacement Lens Set #053522033360.

view full answer...

Answer 3

The Replacement Red Lens for Wesbar Submersible Trailer Tail Lights #102641 that you referenced measures 8 inches wide by 2-13/16 inches tall. I attached a picture that shows it's dimensions as well.

view full answer...

Answer 4

I pulled a Wesbar Replacement Lens Set #053522033360 and found that the outer dimensions are the same as your lenses. 8 inches by 2-7/8 inches. And even the long dimension of the bolt holes is the same at 7-1/4 inches, but the shorter distance is…

view full answer...

Answer 5

For a set of replacement lenses for the Wesbar lights associated with the replacement capsule 763560 that you have referenced you would need to use #053522033360. This also includes the smaller side lenses. The larger lenses measure 8 inches by…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Replacement Lens Options for the Wesbar Tail Light Lens # 102641

Continue Researching