Location Of Holes To Be Drilled For a B&W Turnover Ball On a 2013 Ram 1500 Short Bed Truck

Updated 12/20/2021 | Published 12/18/2021

Products Featured in This Question

B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs

(5038)

$699.00

4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitch for Dodge Ram 1500

(390)

$171.16

Question:

2013 ram 1500 quad cab w 6’4” bed….what’s the distance fore/aft where you drill the hole? How do you locate the correct distance/location? I see the installer in the video measuring from the rear edge of the bed but no distance is mentioned.

asked by: Mike W

Helpful Expert Reply:

For your 2013 Ram 1500 with the 6'4" bed you will drill the 4" hole for the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1309 at 40-1/8" from the rear edge of the bed. This hole will be centered between the fenders.

The 3/4" hole will be 37-3/8" from the rear edge of the bed and 4-3/4" off the bed center line to the drivers side of the bed. Be sure to see the included image for help in marking the hole centers.

Since you have a short bed the 4" Offset Ball # BWGNXA4685 will help you to gain additional turning clearance that you would otherwise not have.

expert reply by: Bud M