Replacement Hardware for Aries/Westin Grille Guard on 2004 Jeep Grand Cherokee

Question

Question:

Need mounting kit/brackets for this grill does have headlight guards……. Please help Thanks Oh 2004 Jeep Grand Cherokee larado

asked by: Buck

1

Helpful Expert Reply:

If you have the Aries Grille Guard part # AA1044 then you'll use the Replacement Installation Hardware Kit part # AABRKT-1044 but if you have the Westin Sportsman Grille Guard part # 40-0125 then you'll use the Replacement Hardware Kit part # 40-012PK.

expert reply by: Conner L

1

Replacement Hardware for Aries/Westin Grille Guard on 2004 Jeep Grand Cherokee
(click to enlarge)

Answer 1

We do have a brush guard for your 2004 Jeep Liberty, without knowing what brand or style of brush guard you have I would not be able to tell you what kit will work for it. All brush guards and their mounting kits are vehicle specific. The brush guard…

view full answer...

Answer 2

I'll start this off by saying that grille guards are going to be vehicle specific, so you won't be able to transfer a grille guard from a vehicle that wasn't a 1999 - 2004 Jeep Grand Cherokee. If you've got one off of one of those…

view full answer...

Answer 3

I am assuming you are referring to a grille guard as we currently do not have a brush guard/bull bar designed to fit your 2002 Jeep Grand Cherokee. As long as the grille guard you have is specially designed to fit your vehicle then the correct…

view full answer...

Answer 4

To determine if the grill guard you have will fit your 2004 Jeep Grand Cherokee I would have to have the manufacturer information and model number for the guard. It does look similar to the Aries Grille Guard #AA1044 which uses the Replacement…

view full answer...

Answer 5

The Westin Sportsman Grille Guard - 1 Piece - Black Powder Coated Steel #40-0125 does not require the removal of your factory tow hooks according to the instructions that I've attached. I reached out to my tech contact at Westin and all he could…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Hardware for Aries/Westin Grille Guard on 2004 Jeep Grand Cherokee

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching