Will The VueSMART RV And Backup Camera Work With An Aluminum Trailer

Question

Question:

Will this wireless camera work okay on an all aluminum trailer? I worry that the transmission of the video might impact the quality given the potential for the aluminum to interfere with the wireless signal. I have a Livin Lite 7x20 Quicksilver VRV trailer.

asked by: ANDREW H

0

Expert Reply:

The VueSMART RV and Trailer Backup Camera # HM34FR will not have any trouble with your aluminum Quicksilver VRV 7x20 Trailer.

expert reply by: Bryce D

0

Answer 1

Hi Timothy; for your 2022 Chevy Silverado 1500 diesel we have the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR. This is the only front hitch without the diesel restriction.

view full answer...

Answer 2

Hey Matt! Thanks for the picture and welcome back! I am sorry but I do not have any videos of the EcoHitch Hidden Front Hitch item #EH25HR being installed let alone a detailed one like you're requesting. That looks like chrome plated plastic.

view full answer...

Answer 3

We carry the Timbren Axle-Less System rated at 5,200 lbs part #ASR5200S01. The axle-less system mounts to your trailer frame and takes the place of your old axle and springs.#ASR5200S01 is a straight spindle design. Timbren also offers these axles…

view full answer...

Answer 4

To connect to the WiFi on the VueSMART RV and Trailer Backup Camera #HM34FR you will need to register the product through the Hopkins Towing Solution App and then you'll be able to connect to the VueSMART by using the password…

view full answer...

Answer 5

Only a 7-way trailer connector will have a 12-volt power wire ran to the connector. A 4-way trailer connector will not have a constant 12-volt power wire. As long as the 12-volt power wire running to the 7-way trailer connector is rated for the…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will The VueSMART RV And Backup Camera Work With An Aluminum Trailer

Featured Help Information

Miscellaneous Media

Continue Researching