Wiring Harness For Redarc Tow-Pro Liberty in 2012 Toyota 4Runner

Question

Question:

Which wiring harness do I need to use with the Redarc Tow Pro Liberty Brake Controller RED24FR? My truck is a 2012 Toyota 4Runner-Trail Edition. Thank you!

asked by: Julie F

0

Expert Reply:

The correct wiring harness for your 2012 Toyota 4Runner and the Liberty brake controller is the universal splice-in option:

- Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR

- Redarc Tow-Pro Liberty Brake Controller # RED24FR

I verified this with the manufacturer, Redarc, for you.

expert reply by: Kyle S

0

Answer 1

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is a great option for your 2020 Subaru Outback. The hitch installs between the frame and the bumper using the same hardware from the manufacturer, so it won't impact the…

view full answer...

Answer 2

While you are correct that we offer a couple great choices for Class III hitches for a 2022 Lexus GX 460, we cannot confirm whether hitch manufacturers are developing a design for a Class IV application. With that being said, the only current route…

view full answer...

Answer 3

The only hitches available for your 2022 Lexus GX 460 are Class III like the Curt #C13043. Looking at the Airstream Bambi 16RB this should not be a problem. The trailer has a GVWR of 3,500 lbs so there would be nothing gained by using a Class IV…

view full answer...

Answer 4

From your photo, it looks like you already have a 4-pole/7-way trailer trailer connector on your Lexus GX-460 that's identical to the #HM40975 we offer. This means that if you're towing a trailer that does not have electric brakes, you're…

view full answer...

Answer 5

To install a brake controller in a 2010 Lexus GX 460 the correct install harness is the part #3040-P. This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash,…

view full answer...

Answer 6

You can definitely purchase locking pins like the InfiniteRule Locking Pins #34061775-D to lock both the adjustable ball mount and the shank for the Buyers Products Adjustable Tri-Ball Hitch #3371802225. These all come keyed alike and I test fit them…

view full answer...

Answer 7

The 30-Amp Circuit Breaker Kit for Redarc Tow-Pro #331-CBK30-EB has 10 gauge wire.

view full answer...

Answer 8

The Redarc Tow-Pro Liberty Brake Controller #RED24FR you were looking at is a great choice for your 2021 Toyota Tacoma due to only the control knob being visible once installed which makes it look like a factory option. To install the #RED24FR in…

view full answer...

Answer 9

There is not a replacement 7-way harness, but you can add one to your 2022 Toyota Highlander, and to do so all you'll need is the following: - Universal Installation Kit for Trailer Brake Controller #ETBC7 You'll plug your 4-way into the…

view full answer...

Answer 10

Since there is brake controller wiring present under the dash of your 2022 Ford Ranger XLT you would not need to wire in an additional relay and you can wire the ground of the Redarc Tow Pro Elite #RED44FR (white wire) directly to the ground of the…

view full answer...

Answer 11

You can absolutely install the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR in your 2021 Toyota Highlander with the factory tow package, but there is not an adapter to plug the controller into your vehicle. You will need to use the included…

view full answer...

Answer 12

Since you will be using the 4- and 7-Way installation kit #ETBC7 to add a 7-Way to your 2012 Toyota FJ Cruiser you will not need to get circuit breaker kit #331-CBK30-EB. The ETBC7 kit comes with a 30 amp circuit breaker, wiring, and other…

view full answer...

Wiring Harness For Redarc Tow-Pro Liberty in 2012 Toyota 4Runner

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching