Rhino Rack Crossbars that Fit Retrax XR Tonneau Cover of 2022 Ford F-250 Short Bed

Question

Question:

which rhino cross bar rack will fit my Retrax Pro XR for my 2022 F250

asked by: Rachid M

0

Expert Reply:

Rhino Rack has their kit part # RRVA180B-RRRLT600 which is the correct fit for the tracks of the Retrax XR tonneau cover that you have on your 2022 Ford F-250 short bed # RTT-90383.

expert reply by: Jameson C

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…

view full answer...

Answer 6

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 7

Hey Peter, There unfortunately are no type of extensions for the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. There are just spacers for it so the crossbars sit up higher from the Retrax XR…

view full answer...

Answer 8

I did see the review saying they used spacers for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - 71" Long #RRVA180B-RRRLT600. This system will be approximately 4-1/4" to the top of the…

view full answer...

Answer 9

The best air bag kit for your 2020 Ford F-250 Super Duty with a single rear wheel are the Firestone Ride-Rite Air Helper Springs because they are the strongest, most durable air bags on the market to provide you with optimal support for your…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Rich; as long as those welded brackets aren't blocking the holes for the bolts to run through you can install the Curt Custom Fifth Wheel Bracket Kit for Ford #C99BR on your 2020 F-250. Take a look at the instructions below and compare them to…

view full answer...

Answer 12

Hey Jason, thanks for reaching out! We have a TorkLift tie-down kit for your 2022 Ford F-350 just as long as the electric running boards aren't wheel-to-wheel (I don't believe they are). The kit you referenced is for newer Super Duty pickups,…

view full answer...

Rhino Rack Crossbars that Fit Retrax XR Tonneau Cover of 2022 Ford F-250 Short Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching