Height Of The Yakima Rack And Roll Trailer Crossbars

Question

Question:

What is height from ground to top of round bars?

asked by: Alan

0

Expert Reply:

The height of the Yakima Rack and Roll Trailer - 66" # Y08106 from the ground to the top of the crossbars is approximately 30".

expert reply by: Kevin C

0

Answer 1

When you store the Yakima Rack and Roll Trailer #Y08106 the trailer will be approximately 6' long. The tongue would be need to be removed when stored so the extension won't add anything to the store height since it'd get removed anyway.…

view full answer...

Answer 2

Hey Richard, if you leave the wheels on the Yakima Rack and Roll trailer part #Y08106 it would stick out from the wall 22 inches. If you took them off it would be 14 inches since the wheels are 16 inch in diameter.

view full answer...

Answer 3

Since we have started carrying the Yakima Rack and Roll trailer #Y08107 I have not heard any complaints regarding the wheel bearings failing and only a few instances where people wanted to replace the wheel assembly. If you need to replace your…

view full answer...

Answer 4

While there isn't a life expectancy, per se, of the shocks on the Yakima Rack and Roll Trailer - 66" #Y08106 and 78" #Y08107, upgrading to the HD shocks is absolutely a good idea if your gear weighs around 200 llbs and certainly…

view full answer...

Answer 5

I spoke to my contact at Yakima and she informed me that since your kayaks will be behind your vehicle and not on top it is not as important to have the kayaks strapped down when used on the Yakima Rack and Roll Trailer #Y08106. She did recommend…

view full answer...

Answer 6

I called Yakima and they gave me the dimensions of the two ends on the Yakima Tongue Extension Kit #Y08109. The end of the extension that slides out of the extension and into the trailer tongue has an outside dimension of 1-1/2 inches. The other end…

view full answer...

Answer 7

Yes you can, there's no reason you couldn't back the Yakima Rack and Roll trailers like the part #Y08106 into water at a boat ramp.

view full answer...

Answer 8

The Yakima Rack and Roll Trailer - 66" #Y08106 for space saving will need the tongue removed. With the tongue removed, the trailer is 6 feet long. I've attached a photo of this system with tongue and wheels removed for storage to assist.

view full answer...

Answer 9

One of the many nice things about the Rack and Roll Trailer is that Yakima did a really good job of designing it so that it doesn't require a lot of maintenance. - Yakima recommends checking the wiring connections, beginning with the trailer…

view full answer...

Answer 10

To be on the safe side I recommend the Tongue Extension Kit for Yakima Rack and Roll Trailer, part #Y08109. This is designed to allow you to be able to carry longer boats on the Ranck and Roll Trailer without having to shift the canoe one way or the…

view full answer...

Answer 11

Yes, the 66 inch wide Yakima Rack and Roll Trailer #Y08106 can absolutely carry four kayaks. In fact, if you use cradles - which carries the kayaks on their sides - it can hold up to five kayaks. The Rack and Roll is the best solution because it…

view full answer...

Answer 12

Yes, dielectric grease like the Dielectric Grease for Electrical Connectors #11755 can and should absolutely be used on electrical connectors like your 4-pin trailer connector. Dielectric grease does a great job of protecting your equipment from…

view full answer...

Height Of The Yakima Rack And Roll Trailer Crossbars

Featured Help Information

Miscellaneous Media

Continue Researching