How To Use 5 on 5 Wheels with the Timbren Heavy-Duty Axle-Less Trailer Suspension  

You are correct the only difference in the Dexter Trailer Hub and Drum Assemblies #84656UC3 and #84656UC3-EZ is the grease cap. The Kit #84656UC3-EZ uses an EZ Lube #DC200L-DCRP cap while the other has a standard Grease Cap #F001518 spindles without…

The problem is that the tire size you have on your Toyota 4Runner is fine for vehicle tires but 265/70-17 is not a trailer tire size. That means you would have to use vehicle tires. But you do not want to use vehicle tires because they are…

In order to use Jeep wheels with the Timbren Axle-Less Trailer Suspension System you'll need to go with the part #ASR1THDS03 which has a 2,200 lb weight capacity. This can then be used with the Trailer Idler Hub Assembly part #AKIHUB-550-35-EZ-K…

Generally, it is not recommended to use automotive tires on a trailer application, with the only exception being LT tires. Based on the information I was able to find, it looks like you're in luck because that's exactly what your BFGoodrich…

The only Timbren Axle-Less suspensions offered that are compatible with a 5 on 5 bolt pattern hub/drum and off-road tires has a 2200 lb capacity, part #ASR1THDS01. For brake drums, you'd use #AKHD-550-35-EZ-K and #AKEBRK-35-SA self-adjusting…

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

I have a solution for you, and it sounds like you're looking for a Timbren system that can be used with 5 on 5 hubs that would allow you to use Jeep wheels. Unfortunately the Timbren #ASR1200S03 spindle does not have any hubs with that bolt…

To upgrade the axle and hubs on your Northern Hardware Trailer, I recommend looking at an Axle-Less System like the Timbren #A20RS545. This suspension system will provide you with a smooth, quiet, and safe ride and can completely eliminate the need…

The Timbren Silent Ride #TSR14KT01 can actually be installed by welding it on or bolting it on. You could do both welding and bolt it on, but that is not really necessary. I am not sure of the bracket to move it around on the frame, but they do have…

In order to find a replacement hub for your axle you will need to know the current bolt pattern, as well as the bearings and axle capacity. For example, the Trailer Idler Hub Assembly #84655UC1 you looked at has a 6 on 5-1/2 bolt pattern and is for a…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

The drop spindle model you mentioned, part #A35RD545E would be used over the straight spindle model, part #A35RS545E if you wanted a lower deck height on your car trailer. Since you are most likely already using ramps, I cannot see how you would…