Determining The Correct Size Landing Gear SnapPad Size

Question

Question:

I have newmar 2017 canyon star what snap pads should I order

asked by: Dan W

0

Expert Reply:

To determine which SnapPad's are right for your 2017 Newmar Canyon Star Motorhome, you'll to first measure the diameter of landing gear foot; be sure to include the 'lip" in this measurement.

If you have 10" landing gear feet, then SnapPad EQ Plus Jack Pads for Equalizer Leveling System w 10" Round and 10" Octagon Feet # SP64FR84 is what you'll need. If you have 8 feet the SnapPad HiWay 8 Jack Pads for HWH Leveling Systems w/ 8" Round Jack Feet # SP34FR4 is what you'll need.

expert reply by: Bryce D

0

Snap Pad Measurement
(click to enlarge)

Answer 1

Hey Nelson, since your jack feet are 7-3/4 inch in diameter the correct size SnapPad would be the part #SP34FR which is the 8 inch size. The 1/4 inch difference wouldn't cause any issues and is close enough to allow for a solid fit still.

view full answer...

Answer 2

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

view full answer...

Answer 3

Here is the Roadmaster Direct-Connect Base Plate Kit #1444-3 which Roadmaster said to use for your 2017 Jeep Wrangler Unlimited Rubicon. This comes with the arms for a Roadmaster Tow Bar #RM-676. If you are using a Blue Ox Tow Bar #BX4370 you will…

view full answer...

Answer 4

I am happy to help you get all of the wiring that you need. The trailer light wiring for the 2006 Honda CR-V is T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118336. This will power the lights on your trailer. You will need…

view full answer...

Answer 5

Hello Robert. For that I suggest using butyl tape and non-sag sealant. For butyl tape I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ. This is a 20' long roll of 1" thick tape. For sealant I recommend the Alpha…

view full answer...

Answer 6

Hey Eric, if you were wanting a scissor jack style of leveling jack the part #JSC-24 would be a great set. Is the type of jack you were wanting or were you thinking something more like a stabilizer jack like the Trailer Valet #TV68FR.

view full answer...

Answer 7

While I was able to find your 2021 Newmar Ventana 3412 comes with a Equalizer leveling system, I was unable to verify exactly what legs it will come with. There are a few choices so be sure to check your Equalizer leveling system. 10" Round Jack…

view full answer...

Answer 8

The SnapPad Prime Jack Pads for Power Gear Leveling Systems #SP84FR4 will work for you if you have a Class A or Class C motorhome with a Power Gear or Kwikee leveling system that have 10 inch concave round jack feet. This pack comes with a set of 4.…

view full answer...

Answer 9

While we do not have something like that, we do still have something you may be interested in. Instead, we have the SnapPad Grand Jack Pads for Equalizer Leveling Sytems w/ 10" Octagon and 12" Round Feet #SP84FR74. These pads will add extra…

view full answer...

Answer 10

We do have a variety of SnapPad Jack Stand Pads that come in a 4 pack, like the part #SP34FR64 (8" Round and 10" Round Jack Feet) or part #SP64FR84 (10" Round and 10" Octagon Jack Feet), for example. I've attached a link to…

view full answer...

Answer 11

For 10" octagon shaped jack feet you would need the SnapPad EQ Octagon Jack Pads #SN76FR that you were already looking at, but before purchasing you'll need to measure just how tall the edges stick up from the ground since your jack feet…

view full answer...

Answer 12

The SnapPad EQ, #SN76FR will fit 10" octagon or concave round jack feet.

view full answer...

Determining The Correct Size Landing Gear SnapPad Size

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching