Will the Fastway e2 Weight Distribution Hitch Fit in 2 Inch Hitch on 2021 Jeep Gladiator
Published 09/21/2021 >
Question:
My Jeep gladiator has a tongue weight of 600 pounds , the Fastway E2 hitch I ordered is 8K with 800 pound tongue weight but my installer told me a little overkill on the tongue weight would be ok. The reason I want this model is the trunnions don’t sit as low as the round bars , will this E2 be a problem for me down the road ? Thank you
asked by: Arthur M
Expert Reply:
Weight distribution hitches like the Fastway e2 # FA92-00-0800 should be chosen based off of the tongue weight and GVWR of the trailer that will be towed and not the tow vehicle; generally speaking, any weight distribution hitch can be used on a trailer being towed by your 2021 Jeep Gladiator as long as it has a 2 inch shank to fit your hitch. You'll normally want your trailer's tongue weight to fall somewhere in the middle of the prescribed tongue weight range of the weight distribution system.
The Fastway e2 # FA92-00-0800 is designed to be used on trailers with tongue weights between 400-lbs and 800-lbs, and a GVWR of no more than 8000-lbs; as long as your trailer falls within those specs then the Fastway e2 # FA92-00-0800 is a great choice that provides 2 point sway control.
If your trailer doesn't match up with the specs on the Fastway system and you can provide the tongue weight and GVWR of your trailer, I can help you locate a more appropriately rated weight distribution system.
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2 Inch Ball
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 600 lbs
- 700 lbs
- Fastway
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will # FA92-00-0450 Work For 2023 Ford Maverick Towing Modern Buggy Hopper 1?
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Weight Distribution System For Towing A Grand Design Imagine XLS23LDE With A Ford F-250
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Looking For Budget Friendly Weigh Distribution Hitch To Pull 5K Dump Trailer
- Q&A: Availability of Off-Road Tires for Forest River Geo Pro 19RB
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Hitch Recommendation For 2020 Forest River Geo Pro Travel Trailer
- Q&A: Is There a Version of the Andersen Weight Distribution System that Has 2-5/16 inch Ball
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: How Much Truck Sag Is Too Much? | Suspension Fix Guide


Art
9/21/2021
My Jeep gladiator has a tongue weight of 600 pounds , the Fastway E2 hitch I ordered is 8K with 800 pound tongue weight but my installer told me a little overkill on the tongue weight would be ok. The reason I want this model is the trunnions don’t sit as low as the round bars , will this E2 be a problem for me down the road ? Thank you