How To Replace Brakes on Jayco Eagle with Dexter 3,500 Lb Axle
Updated 09/08/2021 | Published 09/07/2021 >
Products Featured in This Question
Question:
I belive the 2 Dexter axles are 3500#. Ive changes brake on backing plates on some of my boats through the years. You just unbolt the backing plate , held on by 4 bolts and replace. The Dexter axles don`t accept the bolt on backing plate. Question is how do irenew brakes?
asked by: Dale B
Expert Reply:
If you indeed have Dexter 3,500 Lb Axles then the braking assemblies can be swapped out easily by removing the four nuts that attach the backing plate to the flange. Once you cut the wire you can then remove the old assemblies and replace them with the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469 and install in the reverse order. I suggest the Mounting Hardware for 10" Brake Assemblies part # BRKH10B.
If you have a different setup please send photos so I can verify.
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: trailer brakes
- Search Results: dexter backing plate
- Search Results: trailer hubs and drums
- Search Results: brake spoon
- Shop: Electric Trailer Brake Assembly - 7" - Left Hand - 2,000 lbs
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb Axles - 5 on 4-1/2
- Q&A: What Comes With etrailer 7" Electric Trailer Brake Kit
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Why do Dexter Trailer Brake Assemblies Cost More than etrailer
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Shop: Mounting Bolts and Hardware for 12-1/4" Single Brake Assembly - 8,000 lbs to 9,000 lbs
- Shop: Mounting Hardware for 7" Brake Assemblies
- Q&A: Recommended Torque Value For Installing Brake Assembly to 3500# Axle
- Video: Hands-On with the Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: trailer steps
- Search Results: 3500 lbs axle trailer brakes
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K

