Can Solera Powered Awning Arms Be Replaced With Solera Smart Arm Conversion Kit?

Question

Question:

I currently have and 63inch Solera awning with damaged support arms. They are powered, but not the smart arm style. Part# V000431840 My Question is would the 63inch Smart arm set you sell work as a replacement.

asked by: Rich P

0

Expert Reply:

I confirmed with my contact at Solera that the Solera Smart Arm 12V Power RV Awning Conversion Kit - Programmable - 63" Arms - Black # LC759516 will work well as a replacement for your current 63" Solera powered awning arms (non smart arms) V000431840. It will bolt up the same way and work just fine.

expert reply by: Andrew N

0

Solera Awning V000431840
(click to enlarge)

Answer 1

The Solera Classic Universal Awning Support Arms #LC434715 can only be used with manual awnings. To use power Drive Head #LC53TF and Idler Head #LC672052 you need to use an arm like the #LC404523. If you are wanting to upgrade your awning we have the…

view full answer...

Answer 2

As you have a Solera Edge awning on your 2022 Forest River Cherokee you will have to replace the entire awning to be able to use a Solera Screen Room #LC362218 or Solera Family Room #LC362230. The arms you have are specific to the Edge awning so you…

view full answer...

Answer 3

I am not quite sure which outer shell piece you're referring to, for your Solera RV Awning, however we do have the Replacement Endcap for Solera Power Awnings #LC423751 which you mentioned you needed also. If you're able to clarify what other…

view full answer...

Answer 4

As long as your Solera power awning is one of the Solera Smart Arm awnings like the Solera Smart Arm Electric RV Awning #LC759517, then you can add the Wind Sensor for Solera Smart Arm 12V Power RV Awnings #LC715123. The Wind Sensor for Solera Smart…

view full answer...

Answer 5

In order to find new support arms for your awning, you'll first want to note which type of awning you have. We only offer options for Lippert/Solera Awnings at this time. They have several models such as the 18V, Smart Arm, XL, Destination,…

view full answer...

Answer 6

Without seeing your awning, I have no idea of how many parts you might need. I do know you have the Solera Awning, model V000431840. If you need to replace this awning's entire single arm assembly, which is the pitch arm and the gas strut, you…

view full answer...

Answer 7

We do have the replacement short arm assembly that is 63 inches in black with the part #LC404523. This can be used on the left hand or right hand side.

view full answer...

Answer 8

For the Lippert Solera Power Awnings 672050 you will want the Solera Power Awning Drive Head Black item #LC273478. This is the replacement drive head. The Solera Power Awning Idler Head item #LC672052 is the replacement idler head.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Can Solera Powered Awning Arms Be Replaced With Solera Smart Arm Conversion Kit?

Continue Researching