Electric Trailer Brakes for 4-Bolt Flange 2-5/8" x 3-5/8" Apart
Updated 08/23/2021 | Published 08/22/2021
Products Featured in This Question
Question:
I have a homemade gooseneck. The backing plates are a 4 hole pattern but they measure 2 5/8inch side to side and 3 5/8inch top to bottom. The outside diameter of the drum is about 13inch in diameter and 2 1/2inch deep. A local trailer shop couldnt find anything do you have any options for this. If not will be getting new flanges to weld on and go the standard 5 hole route.
asked by: Keith E
Expert Reply:
I do have an option for you but none of our trailer brake assemblies are designed for this brake mounting flange pattern. Therefore, I recommend new flanges which will need welded to the axle; part # 4-34 for 1-3/4"axles, part # 4-35 for 2-3/8" axles, and part # DM52415 for 3" axles.
Product Page this Question was Asked From
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How To Choose The Correct Brake Mounting Flange For Your Trailer Axle
- Q&A: Determining Axle Capacity On A 3" Diameter Axle Tube
- Q&A: Compatibility of the Curt Wiring Harness # 56229 with Hopkins Endurance Connector
- Q&A: Connecting of 7 Way Wiring Harness On 2005 Chevy Express Van To 7 Way Trailer Connector
- Q&A: Replacement 7-Way Connector for a Jayco RV
- Q&A: Will the Curt Echo Brake Controller Work On a 2019 Ford F-150
- Q&A: How to Install the Curt Trailer Connector Part # C57101 on a 5th Wheel Trailer
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: How to Tell the Weight Rating of a Trailer Axle