Correct E-Z Lube Spindle for 2,000 Lb Trailer Idler Hub
Updated 08/23/2021 | Published 08/21/2021
Products Featured in This Question
Question:
I cant seem to find an e-z lube weld in spindle for this hub. Do you have them available?
asked by: Chris J
0
Expert Reply:
The BTR E-Z Lube Spindle for 2,000-lb Trailer Axles part # TRU44FR will work with the Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles part # AKIHUB-440-2-EZ-2K and has a built-in grease zerk for easy lubrication.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Does the Tekonsha Voyager Work with Electric Over Hydraulic Trailer Brakes
- Q&A: Replacement LED Module for a Bargman 84 Series Tail Light
- Q&A: Replacing Wheels on a Trailer with 5 Spoke Utility Hubs and 8-14.5 Size Tires
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Article: Slipper Spring Trailer Suspension System Review
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Trailer Tire Sizing
- Article: Trailer Maintenance Schedule
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)