Replacement Mounting Hardware Thule Weekender

Question

Question:

Hello, I am having a hard time tracking down info on the Thule Weekender box. I have an opportunity to buy one used that does not have mounting hardware so would be buying this kit. I’m assuming this would fit a 2020 Honda CR-V, but was hoping to confirm before buying.

asked by: Jon

0

Expert Reply:

The replacement mounting hardware for a Thule Weekender is the part # 1032802 that you referenced. This box was discontinued before the 2020 CR-V was released so it was never test fit but I can't see why it wouldn't fit.

expert reply by: Jameson C

0

Answer 1

So you can add a replacement lock core to your Thule Weekender 627 cargo box, but the lock core does need to be unlocked to be able to use the universal master key and install new lock cores with the Thule One-Key System Lock Cylinders #TH450200. It…

view full answer...

Answer 2

The majority of Thule Cargo Boxes you can add locks to by obtaining lock cores, the Thule One-Key System part #TH450200. However, this is not the case for every Thule Cargo Box so I would really need to know exactly what model you have in order to…

view full answer...

Answer 3

The Frontier cargo box is no longer in production. I spoke with my contact at Thule and she recommended the EasySnap Mounting U-Bolt #43216, since your cargo box used u-bolts. Thule does not offer replacement u-bolts and wing nuts for the Frontier…

view full answer...

Answer 4

For the Thule Frontier cargo boxes the replacement hinge that is compatible is part #TH14936.

view full answer...

Answer 5

You can use the QM3 mounting hardware #TH04997 for the Weekender rooftop cargo box. This will use the carriage bolts as you stated and will fit 4 inch on center holes. I've attached some photos and a video to assist.

view full answer...

Answer 6

Some Thule cargo boxes can fit to the top channels of your Yakima OverHaul HD ladder rack #Y01151-5955 with the T-Track Adapter for Thule Cargo Boxes with PowerClick #TH27PQ. The box would need to be a newer one with PowerClick hardware like the…

view full answer...

Answer 7

According to Thule you can use the QM3 mounting hardware, #TH04997, for the Weekender cargo box. The crossbars on your 1998 Toyota 4Runner will need to be up to 3-5/8 inches wide. I have included a picture that shows how this hardware will install.

view full answer...

Answer 8

Yes, a Thule Weekender cargo box can fit Thule aero crossbars.

view full answer...

Answer 9

Thank you for your purchase from etrailer of the Thule Overcast Awning #TH8002AW604. The minimum crossbar spread is 36 inches from center to center and that is for balance and weight bearing purposes. Technically it can be assembled and mounted at…

view full answer...

Answer 10

I do have an option for you but there isn't any alternative mounting hardware specifically for the Thule Weekender Rooftop Cargo Box. That said, you should be able to retrofit another set like the Replacement Mounting Hardware for SportRack and…

view full answer...

Answer 11

The Thule Weekender has a minimum crossbar spread of 24-inches and a maximum of 36-inches. If the distance between the center of your front crossbar and the center of your rear crossbar is between 24 and 36 inches, then the Thule Weekender will fit…

view full answer...

Answer 12

For the Replacement Mounting Hardware for Thule Weekender Cargo Box #1032802 the reinforcement plate will go on top of the crossbar (but under the box), while the Replacement Quick On/Off Bracket #TH04973 will go underneath it. The tie-down bracket…

view full answer...

Replacement Mounting Hardware Thule Weekender

Continue Researching