Roof Rack Accessories that Can Fit Rhino Rack Pioneer Platform for 2020 Nissan NV 3500

Question

Question:

Hi, I am considering this platform rack for our 2020 Nissan NV 3500. Besides cargo, are there other attachments that I can use with the platform such as kayak or bike mounts?

asked by: Michele

0

Expert Reply:

With the Rhino Rack Pioneer Platform Rack part # RR73QX that fits your 2020 Nissan NV 3500 you can basically attach any roof mounted accessory that is designed to attach to the top channel of a crossbar to it but also there is the crossbar attachments part # RR43138B which can give you a traditional set of bars as well. For a kayak carrier you could use the Thule # TH834 as well.

expert reply by: Jameson C

0

Answer 1

You are correct! The Rhino-Rack Pioneer Platform Rack #RR73QX you were looking at simply attaches to your 2017 Nissan NV 3500's naked roof by means of the factory ditches. You will not need to drill into the roof as the included brackets and…

view full answer...

Answer 2

Hey Tony. We have a few options Slimline II Platform Racks that you can attach to a flat roof. I have listed them below: Front Runner Slimline II Platform Rack for Camper Shells - Track Mount - 93" x 58" item #FR69AJ Front Runner Slimline…

view full answer...

Answer 3

Yes we do have a solution to haul a motorcycle on the front of your 2017 Nissan NV3500. First you would need to install The Curt Front Mount Trailer Hitch Receiver #C31077. This front mount hitch has an easy, bolt-on installation with no welding…

view full answer...

Answer 4

I checked to see if there was conversion kit to convert your Malone high bed trailer to a low bed #MPG464-LB. I know this isn't going to be ideal, but what you can do is reuse the U-bolts from the cross bars you have now, and reattach the cross…

view full answer...

Answer 5

Forgive me but we do not carry ARB products so I am by no means an expert on them but I was able to get into contact with one of their reps and we were able to come up with a way for you to mount the ARB Awning 2000 on your Yakima Round Bar Roof…

view full answer...

Answer 6

I have an answer for you. Unfortunately, the Batwing and Foxwing Hardware Kit for Rhino-Rack Heavy-Duty Crossbars #RR33101 is customized to fit the Rhino-Rack Batwing Awnings as well as the Rhino-Rack Foxwing Awnings. The bolts specially fit the…

view full answer...

Answer 7

I have a great solution for you. Unfortunately, in order to mount the Yakima LockNLoad Platform Rack for Crossbars #Y05049-39 to your 2021 Nissan NV 3500, you will need a complete roof rack system with crossbars. However, we do carry a platform rack…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Roof Rack Accessories that Can Fit Rhino Rack Pioneer Platform for 2020 Nissan NV 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching