Post Style Guide On that Fits Tri-Toon Pontoon Boat Trailer

Question

Question:

Will these fit on a pontoon tri-toon boat trailer

asked by: Eddie M

0

Expert Reply:

We actually have a boat guide on that was designed for pontoon boat trailers with the part # CE27670 which is better designed for the frame styles of pontoon boat trailers. The # CE27760 wouldn't work as it would need a different frame style.

expert reply by: Jameson C

0

Answer 1

Typically you want to put pontoon guide ons like the #CE27670 between 2 and 4 inches away from the pontoons. These would definitely not dent the pontoons.

view full answer...

Answer 2

The PVC pipes of the CE Smith Post Guide Ons #CE27670 that you referenced do not spin. They actually have a slit cut into the bottom of them that lines up with a groove on the elbow fitting that prevents them from spinning. These aren't intended…

view full answer...

Answer 3

Pontoon boats normally use guide-ons that mount in the center of the trailer, and even with the three pontoons on your aptly named Aqua Patio Tritoon having lifting strakes, the CE Smith Post-Style Guide-Ons for Pontoon Boat Trailers #CE27670 should…

view full answer...

Answer 4

The CE Smith Post-Style Guide-Ons for Pontoon Boat Trailers - 22" Tall - 1 Pair #CE27670 will work just fine for a Tri-Toon. You would just install the second set on the outside of the middle pontoon instead of the inside. They would guide you…

view full answer...

Answer 5

The pontoon trailer guide-ons only come in a set of 2 as that is all that is needed, although you can add more if you believe that it is necessary. That all just depends on how confident you are about staying on the right track once you have started…

view full answer...

Answer 6

We've had customers use the CE Smith Post-Style Guide-Ons for Pontoon Boat Trailers #CE27670 on tri toon boats like yours that have the extra fins like yours have and they worked great. I attached a picture of this for you to check out as well. I…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Post Style Guide On that Fits Tri-Toon Pontoon Boat Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching