Replacement Wire Loom to Secure RV Slide-Out Wiring

Updated 07/24/2021 | Published 07/22/2021

Products Featured in This Question

Metal Loom Clamp - 1/2"

(180)

$4.30

Wire Loom, 1/2" Diameter (per Foot)

(306)

$2.56

Question:

Greetings. I have a 2017 Outback 332FK VIN 4YDT33222HB453926 and the slide outs have springs that hold the wiring and other connections up and out of the way when the sides are going in and out. They keep breaking so the wires hang down too low so I have to use duct tape to keep them out of harms way when traveling. Do you guys sell the springs? Id like to get at least two of the different springs so I can do on-the-fly repair. Thanks

asked by: Chip E

Helpful Expert Reply:

Thanks for the photo, that was a huge help!

You're needing 1/2 inch wire loom, which we sell by the foot as part # 459075-1. I'd also use some 1/2 inch loom clamps, part # A0500 to secure the wire loom and hold it where it's supposed to be.

expert reply by: Mike L