Correct Fastway e2 Weight Distribution w/ 2-Point Sway Control for a Lance 1475 Trailer

Question

Question:

I have an E2 1000# to pull my new Lance 1475. The Highlander has a 500# max tongue weight, 5000 GVW. 1475 has tongue weight of 250# total GVW of 3700#. My old E2 is overkill. Any downside? Should I replace the bars with 600s?

asked by: Gary O

0

Expert Reply:

The correct Fastway e2 Weight Distribution w/ 2-Point Sway Control for a Lance 1475 Trailer is part # FA94-00-0600 for round or part # FA92-00-0600 for trunnion. The trunnion spring bars are needed for vehicles which sit lower to the ground. The systems are both rated for up to 6,000 lbs.

If you have a higher rated system, it will be too stiff and create an uncomfortable ride. The correct spring bars can be added if you have a different version using part # FA94-02-0699 for round or part # FA92-02-0699 and part # FA92-02-0644 for trunnion.

expert reply by: Conner L

0

Answer 1

Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…

view full answer...

Answer 2

For starters, I would not use the Equal-i-zer Weight Distribution System part #EQ37100ET that you have now as it is rated for a total tongue weight of 600 lbs - 1,000 lbs. The tongue weight of your 1967 Holiday Rambler is likely around 380 lbs - 570…

view full answer...

Answer 3

The Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-0699 could potentially work however without knowing what system you currently have I won't be able to say for certain. The easiest way to find out what you need is to…

view full answer...

Answer 4

The #FA92-00-1000 would be rated too high for the weight of your camper which means it would give you a really harsh ride quality. A better choice would be the #FA92-00-0600 which is the exact same system but with a lower tongue weight range of 250…

view full answer...

Answer 5

To replace either of the hitch balls that come with the Curt Deep Drop Adjustable 2-Ball Mount #C49NR you need the Curt Dual Ball Attachment #C69NR. The individual hitch balls aren't replaceable so you have the get the platform piece, but you…

view full answer...

Answer 6

In order to use the lighter spring bars #C17535 (sold in quantities of 1) you would also have to replace the head because the different TruTrack systems use different heads. The head you would need is #C17506. For about the same cost as replacing…

view full answer...

Answer 7

The difference between the Curt TruTrack #C17501 and #C17499 are their weight capacities and the #C17501 comes with a 2-5/16" hitch ball already installed, whereas the #C17499 would require you to purchase one and torque it down yourself. The…

view full answer...

Answer 8

It is possible for some spring bars to be interchanged based on their size, but that won't increase a weight distribution system's capacity without adding the appropriate head unit. The replacement spring bars that are rated for 1,200 lbs TW…

view full answer...

Answer 9

We do have the weights of the Fastway e2 Weight distribution hitches. The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 4,500 lbs GTW, 450 lbs TW #FA92-00-0450 you mentioned that you have weighs in at 57lbs, but the weight of…

view full answer...

Answer 10

First, I recommend looking at the owners manual and hitch for your 2006 Toyota Highlander to make sure that both can be used with weight distribution. To choose a weight distribution system you will need to go by the total tongue weight of the set…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Correct Fastway e2 Weight Distribution w/ 2-Point Sway Control for a Lance 1475 Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching