How to Disconnect the Curt TriFlex C24VV so it can be Recalibrated

Updated 07/12/2021 | Published 07/10/2021

Question:

How do you disconnect to recalliberate the Curtis Triflex ?

asked by: Rose I

Expert Reply:

To disconnect the Curt TriFlex # C24VV, you simply need to unplug it. This should be done for 5 to 10 seconds and should get the controller reset.

However, if you hardwired the controller and cannot unplug it, you will need to unhook the power wire from the battery. This will have the same affect as unplugging from a port or wiring pigtail.

expert reply by: Lazer S