Could Replacement FootBase Thule Tracker 753-2149 Fit 8535122 Foot

Question

Question:

Ive attached 2 pictures. I have a set of aeroblades but no longer have the footpacks. This part looks extremely similar to the feet I had previously. However you only stated Thule Tracker bars. Please let me know what you think. Im willing to order 1 and if it doesnt work, oh well. But if you all are confident it will fit Ill go ahead and get 4. Thanks.

asked by: Jeff

1

Helpful Expert Reply:

In sort of a backwards way we know that the part # 753-2149 does fit the feet you have since we had a customer with a TK1 tell us that on the bottom of the foot they say your same part number of 8535122

expert reply by: Jameson C

1

Answer 1

The correct fit kit to use with the Thule Feet part #TH460R and your current Evo Square bars like part #TH712500 is actually the part #THKIT3101 for your Leer camper shell roof rack tracks.

view full answer...

Answer 2

To replace the broken foot base from your Thule Tracker Roof Rack you will just need the part #753-2149. This includes 1 foot base that will install with the track on your original kit.

view full answer...

Answer 3

You're in a tough spot as Thule has basically phased out your entire roof rack setup from the feet, to the bars, and the fit kit. I wish I had something I could offer that was simple and easy but based on your situation I would go with option 4…

view full answer...

Answer 4

The Replacement FootBase for Thule Tracker #753-2149 is what you currently have on the Thule tracks on your Leer shell. This footbase is for the now discontinued Thule Tracker square bar setup. You may be able to piece this system together even…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Could Replacement FootBase Thule Tracker 753-2149 Fit 8535122 Foot

Product Page this Question was Asked From

Continue Researching