Can Dutton-Lainson TW4000 StrongArm Electric Winch DL25200 Be Powered By Marine Battery?

Question

Question:

Can it be hooked up to a marine battery

asked by: Gary L

1

Helpful Expert Reply:

Yes the Dutton-Lainson TW4000 StrongArm Electric Winch - Marine - 1,500 lbs # DL25200 you were looking at can be connected to a marine battery as long as it is a 12v battery that is rated for more than 40 amps.

Keep in mind that the battery will not be getting charged from the alternator of your tow vehicle so the battery so you will need to recharge the battery yourself when it is not in use.

I recommend the Duracell Battery Charger and Maintainer - LCD Digital Display - AC to DC - 6V/12V - 4 Amp # DU59FR which will not only charge the battery but will also maintain it in between uses.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

1

Answer 1

The covers of the Fulton XLT part #F142425 are removable with a Torx head wrench. If you are looking for basically the nicest hand winch around this would be the winner. Our customers who have this winch all really like it so I know you will like it…

view full answer...

Answer 2

Would you be able to send me some pictures of your setup? Typically winches like the Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200 are installed on the boat trailer and they draw power from either the tow vehicle battery via the 12V Power…

view full answer...

Answer 3

The Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200 is a great option for you. It can be mounted directly to your trailer or you can use the hitch ball adapter plate #DL24053 to use with your trailer hitch ball.

view full answer...

Answer 4

The Dutton-Lainson StrongArm Electric Winch #DL25215 doesn't come with a mounting plate but you can use part #DL24055 or #DL24059 if your current mounting bracket doesn't match with the mounting hole pattern for this winch (see attached).

view full answer...

Answer 5

There is indeed a remote available for you to add to your Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200. What you need is the following part: - Dutton-Lainson Remote Hand-Held Switch for DC StrongArm SA Series Electric Winches #DL24054

view full answer...

Answer 6

The Dutton-Lainson TW400 StrongArm Electric Winch #DL25200 is rated for use with boats up to 4000-lbs total weight. Having roller bunks provides a definite advantage over standard carpeted bunks since this trailer feature reduces friction. However,…

view full answer...

Answer 7

The Fulton F2 Fully Enclosed Trailer Winch #FW20000301 does not have any kind of adapter plate to allow you to mount it to a different bolt pattern. You will have to drill new holes if you want to use this winch. I attached a diagram below with the…

view full answer...

Answer 8

The Dutton Lainson StrongArm Winch part #DL24874 (also known as the SA12000), can have a strap or cable attached to it. What you described is how you would replace the cable with a 2 inch strap for this winch.

view full answer...

Answer 9

The Replacement Spring #4769-28 that you referenced will install onto the pawl assembly of your winch. Check out the pictures I attached that show an exploded diagram to see how it installs.

view full answer...

Answer 10

You are correct in that an electric winch listed weight capacity refers to it's line pull strength. A common ratio for determining your winch load capacity is 2:1. For example, a 2,000-lb boat would require a 1,100-lb winch. There are extenuating…

view full answer...

Can Dutton-Lainson TW4000 StrongArm Electric Winch DL25200 Be Powered By Marine Battery?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching