Take the strain out of loading and unloading your boat with this electric winch, featuring a power-in switch and a freewheel-out clutch. This DC-powered winch is designed for boats up to 4,000 lbs and includes a wiring harness for easy installation.
Features:
Specs:
A common ratio for determining your winch load capacity is 2:1. For example, a 2,000-lb boat would require a 1,100-lb winch. There are extenuating factors, however, that will determine the appropriate winch size for your purposes.
The ratio can be stretched to 3:1 in instances when the trailer in use has high-quality rollers and is most commonly used on ramps where boats float most of the way onto the trailer.
In contrast, using a boat trailer that has wooden bunks, lacks self-alignment capabilities, and is most commonly used on ramps where the boat must be winched most of the way onto the trailer reduces the ratio to 1:1.
Note that pontoon trailers and other special designs require special consideration when determining winch capacity.
| Percent Incline | Multiply By |
|---|---|
| Level Surface | 10.0 |
| 5 (3 degrees)) | 6.67 |
| 10 (6 degrees)) | 5.02 |
| 20 (11 degrees)) | 3.40 |
| 30 (17 degrees)) | 2.61 |
| 50 (26 degrees)) | 1.86 |
| 70 (35 degrees)) | 1.53 |
| 100 (45 degrees)) | 1.29 |
To calculate your winch's rolling load capacity - the amount of weight it can pull up an incline - you must multiply the winch capacity by a factor determined by the degree of the incline.
The multiplication factor shown includes a 10 percent rolling friction factor. Note: A 5 percent - or 3 degree - incline is a 1/2' rise in 10'. Follow the chart to determine your winch's rolling load capacity.
All Dutton-Lainson StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting or transporting people, or for handling loads over areas where people could be present.
Average Customer Rating: 4.7 out of 5 stars (146 Customer Reviews)
Take the strain out of loading and unloading your boat with this electric winch, featuring a power-in switch and a freewheel-out clutch. This DC-powered winch is designed for boats up to 4,000 lbs and includes a wiring harness for easy installation.
Unit came super fast. Good product
I’ve had no problems with it. I use it on a davit to lift and lower a Sea-Doo in and out of the water. It weighs 650#.
Do you have a question about this Trailer Winch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.