Replacement Hub Assembly For 2003 EZLoader 3-EZB 12-14 Boat Trailer

Updated 07/06/2021 | Published 06/24/2021

Products Featured in This Question

Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized

(140)

$41.94

Cotter Pin - 1/8" Thick x 1-3/4" Long

(836)

$1.17

Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1

(656)

$5.35

Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)

(1444)

$31.24

CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1

(423)

$5.47

LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge

(273)

$10.77

Replacement Trailer Hub Bearing - L44649

(2119)

$21.72

Question:

Hi, I want to replace my Hubs on my 2003 EZLoader 3-EZB 12-14 1000 Boat trailer.It has 5 x 4.5 Hubs I believe.Do you have a complete greased Hub all assembled that would work for me preferably Galvanized. Thanks

asked by: Herb F

Expert Reply:

I recommend the Galvanized Dexter Trailer Idler Hub # 8-259-50. With this you will need 2 Trailer Hub Bearings # L44649 and a Grease Seal # 34823 per hub. The races are already installed on the hub and you can reuse your Bearing Buddy Bearing Protectors # BB1980A unless they are damaged and in need of replacement.

A new Cotter Pin # 165649 and Lug Nuts # CE11051 are also available individually if they also need replaced.

Currently we do not have these parts available as a complete greased assembly. I recommend using LubriMatic LMX Industrial Strength Grease # L11390 with its highly water insoluble formula. It also works well under extreme temperatures and high wear situations.