Recommended Class IV Trailer Hitch Receiver For 1992 Ford F-250 Extended Cab 4WD

Updated 06/24/2021 | Published 06/22/2021

Products Featured in This Question

TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers

(15)

$803.04

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(184)

$35.74

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(265)

$244.09

Question:

I need a class 4 hitch if available for 1992 F250 Extended cab 4WD. I previously had a 1992 F350 4 WD 4 door pickup truck and saved the hitch. It is not the same bolt pattern as the same year F250 Extended cab

asked by: Gary M

Expert Reply:

We have just what you are looking for.

I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14001 which is a confirmed fit for your 1992 Ford F-250 Extended Cab 4WD and has the Class IV rating you were wanting. You will need to drill a few holes to get this hitch mounted on your truck, but that is the case for all of the Class IV Hitches available at this time.

This hitch has a 1000lb tongue weight rating and 10000lbs trailer weight rating, or a 1200lb tongue weight rating and a 12000lb trailer weight rating if using a weight distribution hitch. While this hitch has these ratings your truck may not so I recommend taking a look in the owners manual of your F-250 to confirm its towing capacity, and use the lower ratings between the hitch and truck.

If your F-250 does not have a vehicle wiring harness you will also need the # 118316.

I included installation videos of the products mentioned for you to take a look at.

expert reply by: Samuel C