Replacement Bolt And Cotter Pin For A TorkLift GlowStep Camper Scissor Steps

Question

Question:

We bought your TorkLift GlowStep Camper Scissor Steps 5. We love them but recently lost one of the bolt and cotter pins, that hold it on the back of the camper. How can we get another one?

asked by: Yvonne E

0

Expert Reply:

We don't currently carry the bolt and cotter pins that fit the TorkLift GlowStep Camper Scissor Steps - 5 Steps - Aluminum - 20" Wide - 325lbs # TLA7805 but we do carry the pin lock # TLA7509 that you could put in its place and add some security to your steps so no one can take off with them.

expert reply by: Kevin C

0

Answer 1

The Brophy Camper Scissor Steps #AS25 weigh 33 lbs. They can be folded up, as shown in the attached photo, to make handling them easier since you will be taking them on and off. I've also added a link to a video review of this product for you to…

view full answer...

Answer 2

Hey Jamie! The collapsed height is 19-1/4" for the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear item #TLA8105. I have linked a diagram below that will show you this dimension. What are you looking to install these steps on?

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 5

Hey Corey, yes the Curt fifth wheel rail kit part #C16411-104 that you referenced is both a confirmed fit for your 2013 GMC Sierra 3500HD and would work also fit your Draw Tite fifth wheel hitch as well. This rail kit is designed to provide industry…

view full answer...

Answer 6

I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part #34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside…

view full answer...

Answer 7

Hi Jason! We have the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1012 listed for your 2013 Chevy Silverado 2500HD (6.5 or 8 foot bed). This is just our part number for the GNRK1012 on B&W's website, but they are one and the…

view full answer...

Replacement Bolt And Cotter Pin For A TorkLift GlowStep Camper Scissor Steps

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching