Replacement Motor For Lippert Stabilizer Jack

Question

Question:

lippert stabilizer jack. hi, my motor toast and I need a new motor but it is not clear what motor that is. it looks most like: Replacement Electric RV Stabilizer Jack Motor for Lippert Landing Gear - Rear Item # LC352338 the only number i see is KW-160119912 - but the final 3 numbers are not clear at all - could be kw-160119012... is there any way to tell for sure?

asked by: Michael A

0

Expert Reply:

Thanks for the photo, and I searched but could not find anything with the numbers on the sticker. Truly, the only way to know which is the correct replacement is to know the model of your Lippert stabilizer jack. There are only a couple that are available, so there are a pair of options:

- High-Speed Stabilizer Jack 298707, 337199, or 369774: Replacement Electric RV Stabilizer Jack Motor # LC352338

- Standard Speed Stabilizer Jack 113407: C-800 Replacement Klauber Motor for Standard Lippert Electric Stabilizer Jacks # LC138445

If I had to make an educated guess, based on your photo the right replacement is the # LC352338, but I can't guarantee that. You may be able to find the model number somewhere on the jack itself. Or, if you are unsure you do have the option of replacing it with the Lippert High-Speed Power Stabilizer Jack # LC298707.

This will fit mounting hole spacing of 68-11/16" from center-hole to center-hole.

expert reply by: Kyle S

0

Lippert Stabilizer Jack Motor
(click to enlarge)

Answer 1

Even though the 337199 has been discontinued there's still quite a few out there on the market so you could still get an exact replacement with the Lippert High-Speed Power Stabilizer Jack - 30" Lift LC337199 or swap to their other model,…

view full answer...

Answer 2

Hey Jim. To replace your LCI model 377199 you can use the Lippert High-Speed Power Stabilizer Jack item #LC369774 or item #LC298707. The Lippert 377199 is no longer available but the item #LC369774 or item #LC298707 are the modern replacements. They…

view full answer...

Answer 3

The replaceable parts for the Lippert PSX2 stabilizers include the following: Switch and Harness - #LC387874 Switch Hatch Box (White) - #LC134025 If you're needing to replace the entire unit we don't have the PSX2 but we do have the Lippert…

view full answer...

Answer 4

If your current switch on your 2015 Forest River trailer has 4 wire setup, then the Lippert Replacement Electric Jack Switch with Harness, #LC387874, will work for your application. The following wire colors will connect to your trailer's jack…

view full answer...

Answer 5

The Lippert Components High-Speed Power Stabilizer Jack - 30" Lift #LC298707 is the updated version of the 198641 you have. We have the C-800 Replacement Klauber Motor for Standard Lippert Components Electric Stabilizer Jacks #LC138445 for your…

view full answer...

Answer 6

In regards to the Lippert Components High-Speed Power Stabilizer Jack like part #LC298707, the first thing I would do is check voltage on your battery to make sure it is above 12.4 volts. If it is not then you have a dead battery and it will need to…

view full answer...

Answer 7

I attached a picture that shows the install instructions for the Lippert Components High-Speed Power Stabilizer Jack #LC298707 that you referenced and in it you'll notice a set distance isn't specified for where it has to install on the…

view full answer...

Answer 8

Yes, based on my research the Optronics Lens #AST60B is indeed the correct replacement for your existing AS2T216 model assembly. To be extra sure you can also quickly compare the dimensions of your current lens to this replacement, which measures…

view full answer...

Answer 9

I have attached a parts breakdown of the Lippert Components Power Stabilizer Jack but I am not sure which roll pin you are referring to. That said, it should like the shear pin may have been damaged so in which case you would need to replace the…

view full answer...

Answer 10

The Lippert stabilizer jacks like you have use an 6 amp auto reset circuit breaker and a 20 amp fuse or breaker. If you check out the diagram I attached you'll see how it normally would be wired. For a 20 amp breaker you'd need the part…

view full answer...

Answer 11

I checked with the manufacturer for you, and they say that the Solera Awnings are slower when they retract. If you are sure there are 12 volts by testing with a multimeter the next thing to do is ensure the pitch arms aren't bent at all, which…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Motor For Lippert Stabilizer Jack

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching