Can Wesbar Trailer Tail Light 403076 Replace Wesbar 102641 On Jet Ski Trailer?

Question

Question:

Wasbar 102641 it tapered to fit my jet ski trailer. 403076 is not tapered however is this the correct replacement part?

asked by: Dan P

0

Expert Reply:

The Replacement Red Lens for Wesbar Submersible Trailer Tail Lights for Trailers Over 80" Wide # 102641 you mentioned is actually the replacement lens for the Wesbar Low Profile Trailer Tail Light - Submersible - 7 Function - Incandescent - Passenger Side # 403076.

Since you have the same light the # 403076 will be an exact replacement for your jet ski trailer.

If you are also needing the driver side like you will need the # 403026.

I included a few videos of the lights mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Can I get a picture of the lights possibly? Since it's a Wesbar light we probably have what you need since we carry that brand.

view full answer...

Answer 2

We do offer a wide variety of replacement lights for trailer but since trailer manufacturers don't keep a record of what they use on trailers I would need some pictures of the lights you are wanting to replace along with some measurements so I…

view full answer...

Answer 3

I pulled up as many pictures of your trailer as I could off Google and it looks like the taillights you would need are part #STL16RB for the passenger side and part #STL17RB for the right hand side.

view full answer...

Answer 4

In order to replace the taillight on a Trail Star Trailer you'd simply find one with the same style (shape/function) and then choose the correct replacement based on size. There are several types of Trail Star Trailers so it would be difficult to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Can Wesbar Trailer Tail Light 403076 Replace Wesbar 102641 On Jet Ski Trailer?

Featured Help Information

Miscellaneous Media

Continue Researching