Determining Which Hitch Extender To Tow Trailer W/ 2021 Ford F-350 W/ Wolfpack 850 Truck Bed Camper
Question:
I have an Wolfpack 850, the steps pull down. Should I measure to the end of the steps after pull down, or to the end of bumper before steps are down? Thx
asked by: Lenny S
Expert Reply:
I would measure both. First measure from the center of the hitch pin hole on the trailer hitch receiver to the edge of the bumper, and then to the edge of the steps.
While you are not going to be towing with the steps down, you do want to make sure you will be able to lower them with the trailer still attached or your will need to unhook the trailer before getting in the camper.
If the TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 36" Long # TLE1636 for your 2021 Ford F-350 is not long enough then we have the 48" version # TLE1648.
Keep in mind that with the # TLE1636 you are limited to 360lbs tongue weight and 3600lb trailer weight, or 720lbs tongue weight and 7200lb trailer weight if you use a weight distribution hitch, and with the # TLE1648 you are limited to 300lbs tongue weight and 3000lb trailer weight rating or 600lb tongue weight and 6000lb trailer weight with a weight distribution hitch.
I included videos for both of the products mentioned for you to take a look at.
Products Referenced in This Question
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 48" Long
- Hitch Adapters
- Hitch Extender
- Trailers
- 48 Inch Extension
- Fits 3 Inch Hitch
- 6000 lbs
- TorkLift
more information >
Product Page this Question was Asked From
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 36" Long
- Hitch Adapters
- Hitch Extender
- Trailers
- 36 Inch Extension
- Fits 3 Inch Hitch
- 3600 lbs
- TorkLift
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Camper Tie-Downs
- Shop: TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"
- Shop: TorkLift Camper Tie-Downs - Custom Frame Mount - Front
- Shop: TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
- Shop: TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 36" Long
- Video: How to Install: TorkLift SuperHitch Magnum Trailer Hitch Receiver on your 2022 Ford F-350 Super Duty
- Search Results: f1008~30
- Search Results: hitch extender
- Q&A: Adapter and Re-Wiring Kit for Lance Truck Camper with Round Pin 7-Way Plug
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Shop: TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs - Stainless Steel - Qty 4
- Shop: TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Gray - Qty 4
- Q&A: Recommended Adapter for Carrying E-Bikes and Towing Trailer With Jeep Grand Cherokee
- Q&A: Weight Distribution and Hitch Extension for Truck Camper of 2019 Ford F-350 with 3 inch Hitch
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Video: Installation: TorkLift Tie Downs on a 2020 Ford F-250 Super Duty
- Video: How to Install: TorkLift Tie Downs on your 2021 Ford F-450 Super Duty
- Video: Breaking Down the TorkLift Cannon Hitch Extension
- Video: Let’s Check Out the TorkLift Cannon Hitch Extension
- Q&A: Hitch Extender for 2020 Ford F-450 with Camper that Extends Past Truck 36 inches
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Finding the Right Trailer Wiring Harness
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
on Hitch Adapters
