Adjustment Hole Spacing and Diameter of Reese RP69FR Weight Distribution Shank
Updated 05/08/2021 | Published 05/07/2021
Products Featured in This Question
Question:
What is the hole diameter of this reese shank? I am looking for a different shank for my curt truetrack 17500.
asked by: Travis V
0
Expert Reply:
The Reese # RP69FR weight distribution shank uses the industry standard bolt hole diameter and spacing. The holes are 3/4 of an inch in diameter and spaced 1-1/4 inch apart on center.
I've provided a photo, showing these and other key dimensions of the # RP69FR Reese Weight Distribution Shank.
The shank would work perfectly with your Curt # C17500 TruTrack Weight Distribution kit.
expert reply by:
Mike L
0
Key Dimensions of Reese RP69FR Weight Distribution Shank
(click to enlarge)
(click to enlarge)
Continue Researching
- Search Results: weight distribution hitch
- Search Results: rp69fr
- Search Results: shank
- Search Results: weight distribution shank
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 12-1/2" Rise 9-3/4" Drop - 1.2K TW
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: Replacement Weight Distribution Shank for EZ Lift Weight Distribution System
- Shop: Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 7-3/4" Rise, 5-1/4" Drop - 1.2K TW
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 10" Rise, 6" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 10-1/4" Rise, 5-1/2" Drop - 1.2K TW
- Shop: Blue Ox TrackPro Weight Distribution Shank for 2" Hitches - 11 Hole Adjustment
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems