Hole Spacing on Hand Rail for 2nd Generation MORryde StepAbove Steps

Question

Question:

need to know the spacing of the mounting bolts, I have a 2021 model Montana with 4 step entry steps.

asked by: John A

0

Expert Reply:

The Handrail for Second Generation MORryde StepAbove and StepAbove with Strut Assist Steps # MR73AR bolt holes are 3/4" apart center on center on the curved side and 4-1/2" apart on the long side.

expert reply by: Erik B

0

Answer 1

I contacted the manufacturer about the 4 bolts for the Handrail for Second Generation 4-Step MORryde Steps #MR73AR. They are 1/4" - 20 x 1 1/2” long – grade 5 zinc coated bolts. The washers are 1/4” grade 2 zinc coated.

view full answer...

Answer 2

If you have the first generation, 4-step MORryde steps, then the Handrail for First Generation 4-Step MORryde Steps #MR33RR will work for you. If you have the second generation 4-step MORryde steps, then the Handrail for Second Generation 4-Step…

view full answer...

Answer 3

The largest cable lock that will fit is going to be 5/16" for the Portable Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down - 30 Amp #HU67FR. So the best option for a cable lock of that size is the Master Lock Python Cable…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Kevin! The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2460-2580 will not change the ride height of your 2020 Grand Design Reflection. The only exception is if your existing suspension is really worn out, in which case it…

view full answer...

Answer 6

Hey James, thanks for reaching out. TheMORryde StepAbove RV Step #MR48RR is the MORryde part STP-207. This is for doors between 23-3/4" and 26-1/4" wide, and for an entry height between 34" and 36". Based on the numbers you…

view full answer...

Answer 7

Hey Michael! When you're choosing a weight distribution hitch the most important factor is the tongue weight of the trailer. It looks like the dry/unloaded tongue weight of a Brinkley Z Air 297 is 924 lbs. Once you add batteries and propane you…

view full answer...

Answer 8

Hi Ron, I reached out to Stromberg Carlson to confirm that the Lend-A-Hand Banister RV Handrail part #SC48TR would work with trailers with corrugated sides, and they said that it will! They also let me know that once the brackets that install the…

view full answer...

Answer 9

Hey Peter, so the only MORryde StepAbove steps that have hand rails available are the 3 and 4 step options. The 2 step part #MR85HR does not have a step option.

view full answer...

Answer 10

Hi Lavana! The Onan Generator - Quiet Series 4000 EVAP Onboard RV Generator - 4,000 Watts - Gasoline #CM32ZR does need to have an external/auxiliary tank to tap into to operate (either just a tank like on a 5th wheel, or the gas tank on an RV). It…

view full answer...

Answer 11

You are right on. The 8" rise/drop on the MORryde StepAbove Fold-Down Steps #MR98RR is the height between the steps. The #MR48RR you were looking at has a 9" rise/drop meaning the distance between the steps is 9". The #MR98RR is…

view full answer...

Answer 12

Hi Susan, That part number comes up as a 60lb gas strut with a 20" extended length and 10mm socket so the Taylor Made Marine Gas Strut for Boat Hatches #3691843-60 would be a fit. To remove your current strut you'll need to stick a small…

view full answer...

Hole Spacing on Hand Rail for 2nd Generation MORryde StepAbove Steps

Product Page this Question was Asked From

Continue Researching