Dimensions for a Brake Mounting Flange for a 3 Round Axle
Published 02/09/2009
Question:
If this mounting flange is for a 3 axle, why does the description state 2.75 ID? My 7K axles are 3 OD. I need brake assemblies and mounting flanges to weld to existing axle.
asked by: Dale
0
Expert Reply:
The measurements of the Brake Mounting Flange for a 3 inch Round Axle, part # 4-44-1, are correct, in that the inner diameter of the flange is 2-3/4 inches. This is because the flange will be mounted to the spindle, not the axle. You will need to check the Outside Diameter of your spindle, as this will mount on the spindle.
expert reply by:
Andi
0
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Troubleshooting Leaf Spring Coming In Contact With Brake Mounting Flange Bolt
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Can I Add Brakes To A Mobile Home Axle?
- Q&A: Length Measurements for EZ Lube Spindle 2.25
- Q&A: Replacement 12" x 2" Brakes For Trailer With Mobile Home Axles
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Can The Ark Ezi-Guides Self-Aligning Boat Trailer Loading System Be Used On A Bunk Trailer?
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: Recommended Brake Controller for a 2006 Kenworth T300 w/ Air Brakes
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Most Popular Wheel Bearings
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer