Recommended Anti Rattle Device for a 2 1/2" Hitch with a 2" Reducer

Question

Question:

Do you have a clamp that works with a 2 1/2” receiver using a 2” sleeve. 2020 Silverado 3500hd

asked by: Dave S

0

Expert Reply:

The best option for your set up will be the Blue Ox Immobilizer III # BX88312. This is specifically for a 2 1/2 inch hitch being used in unison with a 2 inch reducer.

expert reply by: Lazer S

0

Answer 1

Hey Braden, thanks for reaching out. Yes, we do have an anti-rattle device that will work great with your Blue Ox WD setup. The U-bolt style anti-rattle devices are going to give the best results, and for that I recommend the following: - Blue Ox…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Richard! Your 2026 Ram 2500 doesn't have a lot of space around the factory hitch so the etrailer Anti-Rattle Hitch Collar #e55YV you were looking at doesn't have enough room for installation. What I recommend instead is the Roadmaster…

view full answer...

Answer 4

Hi Kristian, great question! The etrailer Anti-Rattle Hitch Collar, part #e55YV, works by taking the slack out between your hitch receiver and the shank of your ball mount or hitch-mounted accessory. It clamps around the outside lip of your 2-1/2…

view full answer...

Answer 5

Hey Mike, congratulations on the new truck! You can definitely use the two together. The Curt StowPro 2-Ball Mount #C34FR53HY uses a standard 2-1/2" shank, making it a great match for our etrailer Anti-Rattle Hitch Collar #e55YV. It installs…

view full answer...

Answer 6

Hey Scott! The etrailer Anti-Rattle Hitch Collar #e55YV is rated for up to 10,000 lbs gross trailer weight and won't reduce the capacity of a properly matched towing setup. As always, your actual towing capacity is determined by the lowest-rated…

view full answer...

Answer 7

Hey Greg! The etrailer Anti-Rattle Hitch Collar for 2.5" Hitch Receivers #e55YV is not compatible with a weight distribution hitch. This is really the only restriction for our anti-rattle. If you need an anti-rattle for a weight distribution…

view full answer...

Answer 8

In addition to the base plates like the Blue Ox set you have for your 2022 Chevy Spark, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars…

view full answer...

Answer 9

You sure can Steve and congrats on the new truck! Our etrailer Anti-Rattle Hitch Collar for 2.5" Hitch Receivers item #e55YV will indeed work with 2" ball mounts. It is not just for bike racks or cargo carriers but can of course be used…

view full answer...

Recommended Anti Rattle Device for a 2 1/2" Hitch with a 2" Reducer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching