Can Brake Controllers Be Moved To Another Vehilcle

Question

Question:

Can you move a brake controller to another vehicle

asked by: Michael W

0

Expert Reply:

Absolutely. Brake controllers aren't vehicle specific, they can be installed on just about any vehicle. Many vehicles such as full sized trucks and SUV's will have a connector under the dash that makes the installation very simple, using a brake controller wiring harness adapter, as long as the vehicle was equipped with the factory tow package which usually includes a 7-way trailer connector at the rear bumper.

If the vehicle wasn't equipped with the factory tow package, you can do a hardwire install of the brake controller using our # ETBC7 brake controller install kit. I'll link to a video explaining how the kit works. If you have a Tekonsha brake controller like the # 90885 P2 you'd looked at, you'll need the # 7894 pigtail unless you still have it.

If you'd care to reply with the year, make and model of the vehicle an the model of brake controller you have, and let me know if if has the factory tow package I'd be happy to recommend the parts needed to install the controller in the other vehicle.

expert reply by: Mike L

0

Answer 1

The best brake controller option we offer for multiple vehicles is the Curt Echo Wireless Trailer Brake Controller part #C51180 since it can be easily transferred without any splicing or drilling. It's also ideal for vehicles without a brake…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 5

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 6

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 7

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 8

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 11

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 12

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Can Brake Controllers Be Moved To Another Vehilcle

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching