Recommended Frame Mounted Trailer Hitch Receiver For Jayco Eagle 320RLDS
Published 03/29/2021
Products Featured in This Question
Question:
you suggested e100 hitch this is the same little hitch the lady told me to get. Iam going to haul my two 55lbs. Electric bikes. I brought the Swagman ebikes carrier from you guys. So saying all this again I need a receiver to bolt or weld to my frame iwas looking at a 350 tongue weight hitch or a 500 tw hitch. I will NOT be towing anything with the hitch. I just want a strong hitch to support the bikes period. . Please help thank you
asked by: Richard B
Expert Reply:
I have another option that may work for you, but Unfortunately the brackets on the # 13703 cannot be flipped which my contact at Curt confirmed.
The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704 can be bolted or welded to the bottom of your I-Beam frame, but is only fits frames up to 66" wide where the # 13703 fits frames up to 72" wide. If your frame is not wider than 66" then this would be your best bet, and has a 350lb tongue weight rating though you will want to reach out to Jayco to find the tongue weight rating of your frame and use the lower rating between the hitch and frame.
Since you mentioned bumper supports in your other question you will want to make sure that the supports are not on the bottom of the frame or they will be in the way of the hitch.
If the supports are on the bottom of the frame, or if your frame is wider than 66" the # E-100 would be the only available option and still has a 350lb tongue weight rating. You could also add the support brackets # MO34VR to reinforce the bumper if you feel it would not be able to support your two 55lb electric bikes.
I included videos for the # C13704 and # MO34VR for you to take a look at.
Product Page this Question was Asked From
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 350 lbs TW
- 3500 lbs GTW
- 18 - 30 Inch Wide Frames
- 31 - 45 Inch Wide Frames
- 46 - 60 Inch Wide Frames
- 61 - 75 Inch Wide Frames
- Towing and Cargo
- Bolt-On
- Weld-On
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Mount-n-Lock SafetyStruts Universal Bumper Brackets - 4" to 4-1/2" - Qty 2
- Search Results: bumper support
- Video: Hands-On with the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets
- Shop: 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
- Video: Ultimate Overview of the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets
- Shop: Mount-n-Lock SafetyStruts Standard Bumper Brackets - 4" to 4-1/2" - Qty 2
- Video: Test Fit: 24x60 etrailer Cargo Carrier for RV Bumper on a 2017 Thor Four Winds Motorhome
- Q&A: Installing Mount-n-Lock SafetyStruts to Tube Frame
- Q&A: What Side of Trailer Frame Does Mount-n-Lock SafetyStruts Install
- Search Results: bumper supports
- Q&A: Trailer Hitch For Forest River Wildwood 29VBUD
- Shop: Curt RV Bumper Hitch - 2"
- Shop: Curt RV Bumper 2" Trailer Hitch Receiver
- Video: Fit Check: 24x60 etrailer Cargo Carrier for RV Bumper on a 2017 Starcraft Solstice Lite Fifth Wheel
- Q&A: What is the Rear Bumper Capacity of a 5th Wheel Trailer and How To Increase It
- Q&A: How to Determine the Compatibility of 2 RV Bumper Trailer Hitch Receiver E-100 With a Pop-Up Camper
- Q&A: Recommended RV Bumper Safety Struts For A Trailer With An I-Beam Frame
- Q&A: Can The Mount-N-Lock SafetyStrut RV Bumper Support Brackets Be Used To Support Electric Scooters?
- Shop: Surco Lawn Chair Rack for Vans and RVs - Ladder Mount
- Shop: Replacement Standoff Spacers for Mount-n-Lock SafetyStruts - Qty 6
- Search Results: cargo