The Low-Down on the Brophy Ball Mount for 2" Hitch Video

The Brophy Ball Mount #BM20 and the Brophy #BH20 referenced in your question are extremely similar to each other. They are both designed for 2 inch trailer hitch receivers, have a 10,000 pound towing weight capacity, feature a long, 13-1/4 inch shank…

The closest option we have that will replace your Atwood 82543 is The Demco Hydraulic Brake Actuator #DM72VR. This actuator does not have the lockout function that the Atwood did, you will need to get The Lockout #T4748800. This lockout will wire…

Thanks for the pictures! You are going to want the Titan Brake Actuator with Manual Lockout item #T63FR. This replacement brake actuator will fit in place of your Atwood 82543 and slide right into your trailer's coupler. The Titan also has a…

I have an option that may work for you, but we do not have a ball mount with 4" rise, a 1-1/4" shank hole, and is 13" - 14-1/2" long. The closest option we have is the Draw-Tite Ball Mount for 2" Hitches - 3" Rise,…

I spoke with my contact at Curt and he informed me that the ball mount part #C45250 that you referenced has a ball mount platform width of 2-1/2 inches.

As you already have the Curt Trailer Hitch Receiver #C76WR for your 2022 Ford Bronco Badlands you will only need the wiring. The Tekonsha OEM Replacement Vehicle Wiring Harness #TK55VR is compatible with your Bronco having LED taillights. This will…

I wish you would have asked this question prior to your purchase of the Curt Extender #C45791, because this extender will not work for your application. It is rated for the 3,500 lb total trailer weight towing capacity and because it is an adapter…

Hello Aaron, While both jacks appear to have the same tube size, I wouldn’t recommend transferring internal parts between them. The outer tube on the Bulldog A-Frame Jack #BD155032 is only rated for 5,000 lbs, so even if higher-rated components fit…

The Roadmaster Htich Extender #RM-071-1075 measures approximately 3 inches deep from the pin hole to the furthest point inside the receiver tube. It's also only designed to be used to flat tow a vehicle with a hitch style tow bar. It can't be…

The Curt Hitch part #C15302 will fit very tight to your rear bumper. It would be hard for me to venture a guess as to how much higher it would sit than your factory hitch. But I can give you a way for you to figure it out. When installed, the #C15302…

In regards to the Curt Trailer Hitch Receiver part #C15302 which is a fit for a 2001 Chevrolet Silverado 2500 HD - 6-1/2 Foot Bed, there are only two factory weld nuts in the frame which get reused, they are the two closest to the bumper. The other…

Hey Brian, thanks for reaching out! The Curt Trailer Hitch Receiver #C15302 is more than capable to handle any of the trailers that your 2006 GMC Sierra 3500 can tow, as I looked it up and I believe your truck can safely bumper tow up to 12K…