Kit to Install 7-Way in Bed of 2006 Ford F-350 Towing Fifth Wheel

Question

Question:

2006 F350 4wd, I have a spot in the rear driver side of my bed for a fifth wheel plug that appears to be factory drilled. I know have a fifth wheel and would like to add this plug to the bed as well as keep the original plug in the rear for bumper pull. do you offer a kit for this?

asked by: Cody R

0

Expert Reply:

To add a 7-way into the bed of your 2006 Ford F-350 that has one at the rear of it you'd just need the # 41157 which was designed exactly for that.

expert reply by: Jameson C

0

Answer 1

The correct spacer you will need for the Firestone Ride-Rite Air Helper Springs part #F2407 on your 2012 Toyota Tacoma is actually going to be the Firestone Axle Bracket Extension Kit part #F2506. These will then bolt to the side of the vertical…

view full answer...

Answer 2

The correct upper mounting bracket for a Firestone Ride-Rite air bag kit for your 2005 Ford F-350 Super Duty, whether it's the 2WD #F2398 or 4WD #F2400, is part #F2135825462. If you need the 1/2" spacer as well then that part is #F5477.

view full answer...

Answer 3

Hey Wade, for the Firestone Ride Rite kit part #F2400 we have the part #F5463 for the lower bracket replacement and part #F2135825462 for the upper bracket. Are there any other parts you are in need of?

view full answer...

Answer 4

Many times Dexter hubs will fit on a Lippert axle, but Lippert does have a few axles out there with special spindle sizes. Every Lippert axle comes with a tag or plate on the axle that gives a serial number or NV number. If you can give me that…

view full answer...

Answer 5

Yes the Vesper wheel part #TA56FR matches what you have now as it has the 8 on 6-1/2 inch bolt pattern and has a 4.77 inch pilot diameter.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Kit to Install 7-Way in Bed of 2006 Ford F-350 Towing Fifth Wheel

Featured Help Information

Miscellaneous Media

Continue Researching