Recommended Bolt Pattern For Hub and Drum Assemblies On Timbren Axle-Less Trailer Suspension
Updated 02/11/2021 | Published 02/09/2021 >
Products Featured in This Question
Question:
Is it possible to get this product with a 6x135 bolt pattern? Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs Thanks
asked by: Morgan B
Expert Reply:
I may have another option for you, but there are no hub and drum assemblies available that use the 6 on 135mm bolt pattern.
The only 6 lug option would be using the Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased # AKHD-655-35-EZ-K, and Electric Trailer Brake Kit # AKEBRK-35-SA with the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs # ASR3500S05.
The option I recommend is going with the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E you were looking at as the 5 on 4-1/2 bolt pattern is most common in regards to trailer wheels.
If you can tell me which size wheel and tires you are wanting to put on your trailer I would be happy to make a recommendation for you.
I included videos for each of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking for TImbren Front Suspension Kit # DF25004F for 2023 Ram 3500
- Q&A: What Is The Difference Between Timbren xle-Less Trailer Suspension T54KV And TASR5200S03?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Lock N Roll Channel Tongue Trailer Coupler for a 2-1/2" Square Trailer Tongue
- Q&A: Bolt Hole Measurements On BTR E-Z Lube Spindle Brake Flange
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Q&A: Trailer Dolly Compatibility with Lock N Roll Hitch
- Article: Trailer Lighting Requirements
- Q&A: Recommended Timbren Axle-Less System with 5 on 5 Bolt Pattern Hubs for Overland Trailer
- Article: Trailer Tire Sizing
- Article: Where to Position the Trailer Axle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Raise Your Travel Trailer Height
- Article: How to Measure a Trailer Axle




