Recommended Lock N Roll Channel Tongue Trailer Coupler for a 2-1/2" Square Trailer Tongue
Updated 01/05/2026 | Published 01/01/2026
Products Featured in This Question
Question:
Cheers, I have a jet ski trailer with 2 1/2 x 2 1/2 square tubing on the tongue. Is this part designed to slide inside by existing tubing after I cut off the hitch? Lock N Roll Articulating Coupler with 30inch Extension - 2inch Receivers - Trailer Side - 11K Part Number: 336TS526
asked by: Scott M
Expert Reply:
Hey Scott. The Lock N Roll item # 336TS526 you were looking at isn't designed for that but I have something that is. For a 2-1/2 square tongue you'll want the Lock N Roll Articulating Channel Tongue Trailer Coupler item # 336TS506. This will bolt directly to the top of your trailer's tongue and provide you with Lock N Roll's unique articulating connection. You can weld it on too.
You will need one of the following ball mounts to connect to the Lock N Roll item # 336TS506:
Lock N Roll Articulating Hitch for 2" Receivers - 2-1/2" Drop/Rise - Vehicle Side - 11K item # 336VS511
Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side - 11,000 lbs item # 336VS501
If you have any additional questions, go ahead and click on the box that says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Lock N Roll Articulating Channel Tongue Trailer Coupler - 2-1/2" Channel - Trailer Side
- Straight Tongue Trailer Coupler
- Off Road Coupler
- Bolt-On
- Weld-On
- 11000 lbs GTW
- 2-1/2 Inch Channel
- Latch Plate
- 2-Bolt
- Standard Grade
- Lock N Roll
more information >
Continue Researching
- Q&A: Articulating Hitch Recommendation for 2023 Intech Flyer Pursue Camper
- Q&A: Which Lock N Roll Coupler Fits On a 2005 Strarcraft RT10 Pop Up Camper?
- Q&A: What Vehicles will Reese Hitch Part Number 41115 Fit
- Q&A: Experiencing Rough Ride with 2,200 lb Timbren Axle-Less Suspension Installed on 1,300 lb Tear Drop
- Q&A: Will Lock N Roll Articulating Coupler # 336TS504 Fit 2018 NuCamp Tag Boondock Edition
- Q&A: Recommended Timbren Axle-Less System with 5 on 5 Bolt Pattern Hubs for Overland Trailer
- Article: Trailer Maintenance Schedule
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Q&A: Will the Curt Echo Work On a 2019 Porsche Cayenne
- Article: Trailer Wiring Diagrams
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Hitch Adapters and Extenders
- Article: How to Measure for Trailer Hitch Drop
Scott M.
1/5/2026
I am also looking to extend my tongue the 30" that the extension offers. The coupler offers a solution to 1/2 of what i need. I hear you when you say is not designed for that specific purpose, but it is designed to fit inside a 2" receiver correct?