Recommended Suspension Lift Kit And Jacks For Livin Lite Quicksilver 8.1 Pop-up Camper

Question

Question:

In order to lift your 2016 Quicksilver 8.1 by Livin Lite with a #9 Dexter axle, you will need to use a lift kit such as the Torflex Lift Kit Single Axle # K71-723-01. This kit will lift your camper's frame by 2-5/8" and provide extra ground clearance. All necessary hardware and instructions are included. I am attaching a demonstration video that may help out.

asked by: Philip J

0

Expert Reply:

In order to lift your 2016 Quicksilver 8.1 by Livin Lite with a #9 Dexter axle, you will need to use a lift kit such as the Torflex Lift Kit Single Axle # K71-723-01. This kit will lift your camper's frame by 2-5/8" and provide extra ground clearance. All necessary hardware and instructions are included. I am attaching a demonstration video that may help out.

expert reply by: Andrew N

0

Philip J.

2/2/2021

In order to lift your 2016 Quicksilver 8.1 by Livin Lite with a #9 Dexter axle, you will need to use a lift kit such as the Torflex Lift Kit Single Axle # K71-723-01. This kit will lift your camper's frame by 2-5/8" and provide extra ground clearance. All necessary hardware and instructions are included. I am attaching a demonstration video that may help out.

Reply

Andrew N.

2/2/2021

The scissor jacks are an excellent choice. They offer quite a big range in height and lift when compared to other jacks, such as a drop leg jack. For example, the Scissor Stabilizer Jacks w/ Handle # TJSCHD-24-4 offers an impressive lift range of 5" to 23-3/4". On the other hand, the Stallion Stabilizer Dog Leg Jack # 288-01892-2 offers a lift range of 15-1/4" to 22-1/4". Both of these options can be welded or bolted on. You will want to measure your current jack setup and determine how much lift you will need so that you can pick a jack suited for your camper. Overall, I recommend going with the scissor jack # TJSCHD-24-4 because it will more than likely have the lift range needed for your camper and it is very easy to install and use. It is rated for 2,500lbs per jack, which is plenty for your camper. This does come in a quantity of 4, so you will only need to make one purchase then you can install them. I am attaching a helpful video going over this product.

Reply

Answer 1

Hey Jarred, there is no issue swapping your current axles out with the 3.5k axle-less system, the Timbren Axle-Less Trailer Suspension - Standard Duty #ASR3500S06; This system does also have the built in 4" lift you're looking for as well.…

view full answer...

Answer 2

You will be able to upgrade your #PD4045KA to use lithium batteries, and in order to do this you'll need to replace the converter (there isn't just an added part aside from the converter that will allow you to do this). So what you need for…

view full answer...

Answer 3

Hey Jim! Thanks for providing the picture of your axle tag. That is a Dexter #9 Torflex axle so the correct lift kit is the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-723-01. This will match the 7-3/4" bolt spacing found on #9 axles…

view full answer...

Answer 4

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 5

Hi Jose! I contacted Dexter to make sure, and you have a #9 Torflex axle on your 2010 StarCraft 816. The pictures you included made this a lot easier to figure out, so thanks for that! With that being said, the Torflex Lift Kit - Single Axle -…

view full answer...

Answer 6

Hey Pete, thanks for the information! You most likely need the #10 Torflex Lift Kit item #K71-707-01 you were looking at but there is a chance you have a different axle so I'd like to verify. If you could send me a picture of your axle tag or…

view full answer...

Answer 7

For your single axle Lance 1475 travel trailer you will use either Torsion Lift Kit #K71-723-01 or kit #K71-707-01 depending on which Torflex axle you have. You can check the identification sticker on the axle beam to find the axle number. If you…

view full answer...

Answer 8

Hey Jeff, thanks for reaching out! I can definitely help you figure out what lift kit you'll need for your 2013 Airstream Sport 16. What Torflex axle do you have? There should be a sticker in the middle of the axle that shows what axle you have -…

view full answer...

Answer 9

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle…

view full answer...

Recommended Suspension Lift Kit And Jacks For Livin Lite Quicksilver 8.1 Pop-up Camper

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching