Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi Artie, So there isn't a trailer hitch with a standard towing capacity above 5,000 lbs for your 2024 Kia Telluride SX Prestige X-Pro. There is a trailer hitch that jumps to a 6,000 lb towing capacity when you use a weight distribution…
view full answer...Hey Mike, thanks for reaching out! I recommend picking up the Curt T-Connector #C29ZV if you have a standard 2023 Kia Telluride, or the T-Connector #C93FV if you have an LX or S model without the LED tail lights. These install by teeing in behind…
view full answer...Hi George, We can get your 2024 Kia Telluride a 7-way, but I checked with our manufacturers and unfortunately there isn't a plug-in option like you were wanting. So you would need a couple parts to add a 7-way, with the first one depending on…
view full answer...Hey Ronald, For a 2024 Kia Telluride EX you'll need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C29ZV. This plugs inline with your factory tail light wiring for a fast and easy installation. If you want to do…
view full answer...The Fogatti InstaShower 8 Plus RV Tankless Water Heater #FG97FR does not include the door, it is just the tankless heater unit. If you are also looking for a door, I have them listed below as there are a few sizes offered. I also included the “kit”…
view full answer...Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…
view full answer...Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…
view full answer...Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…
view full answer...The Lippert Power Stance Electric Trailer Jack #LC89VR does not have a drop leg. The pin you see by the footplate is only for the footplate to remove and install it. The retraction and extension of the leg is electronically controlled. If you're…
view full answer...We actually have a version of the #ETBC7 that we put together specifically with the Curt Echo Mobile brake controller part #C51180 in mind with the #ETBC7L which comes with just the components needed for the Echo. The ETBC7 comes with the same…
view full answer...To install the Stabilizer Jacks - 6-1/4" Drop Leg Travel #TJ01RT-HD you'll need to get 7/16" mounting hardware. In the attached review/installation video we use #14 self-tapping screws to mount these jacks into the frame of the trailer.…
view full answer...The stabilizer jack I recommend for your enclosed cargo trailer is the Drop Leg Stabilizer Jack #TJ01RT because it will work well to stabilize your trailer for loading and unloading and is easy to engage when needed. The #TJ01RT drop leg stabilizer…
view full answer...Related Searches
Filter Your Search
Contact and Help